subroutine blkdat #if defined(USE_CCSM3) use ccsm3_io ! CCSM3 I/O interface, uses mod_cb_arrays use mod_xc, ! HYCOM communication interface & only: xcstop, xcsync, mnproc #else use mod_xc ! HYCOM communication interface use mod_cb_arrays ! HYCOM saved arrays #endif use mod_incupd ! HYCOM incremental update (for data assimilation) use mod_floats ! HYCOM synthetic floats, drifters and moorings use mod_tides ! HYCOM tides #if defined(STOKES) use mod_stokes ! HYCOM Stokes Drift effects from Wave fields #endif implicit none c real day1,hybrlx,cplifq,frzifq integer k,kdmblk,mlflag,thflag,trcflg1 integer lngblk character sigfmt*26 c include 'stmt_fns.h' c c --- initialize common variables. c #if defined(USE_CCSM3) flnminp = flnmpard #else flnminp = './' #endif open(unit=uoff+99,file=trim(flnminp)//'blkdat.input') !on all nodes c c --- 'lp' = logical unit number for printer output c lp = 6 !now defined in xcspmd c c --- four lines (80-characters) describing the simulation read( uoff+99,'(a80/a80/a80/a80)') ctitle if (mnproc.eq.1) then write(lp,*) write(lp,'(a80/a80/a80/a80)') ctitle call flush(lp) endif !1st tile c c --- 'iversn' = hycom version number x10 c --- 'iexpt' = experiment number x10 if (mnproc.eq.1) then write(lp,*) endif !1st tile call blkini(iversn,'iversn') call blkini(iexpt, 'iexpt ') c if (iversn.lt.22 .or. iversn.gt.22) then if (mnproc.eq.1) then write(lp,'(/ a,i3,a,i3 /)') & 'error - iversn must be between',22,' and',22 call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif !error c c --- 'idm ' = longitudinal array size c --- 'jdm ' = latitudinal array size if (mnproc.eq.1) then write(lp,*) endif !1st tile call blkini(itest ,'idm ') call blkini(jtest ,'jdm ') c if (itdm.eq.-1) then !serial relo case only itdm = itest idm = itest ii = itest jtdm = jtest jdm = jtest jj = jtest endif c if (itest.ne.itdm) then if (mnproc.eq.1) then write(lp,'(/ a,i5 /)') & 'error - expected idm =',itdm call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif !error if (jtest.ne.jtdm) then if (mnproc.eq.1) then write(lp,'(/ a,i5 /)') & 'error - expected jdm =',jtdm call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif !error c c --- 'itest,jtest' = grid point where detailed diagnostics are desired c --- itest=jtest=0 turns off all detailed diagnostics if (mnproc.eq.1) then write(lp,*) endif !1st tile call blkini(ittest,'itest ') call blkini(jttest,'jtest ') c if (ittest.gt.itdm) then if (mnproc.eq.1) then write(lp,'(/ a,i5 /)') & 'error - maximum itest is',itdm call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif !error if (jttest.gt.jtdm) then if (mnproc.eq.1) then write(lp,'(/ a,i5 /)') & 'error - maximum jtest is',jtdm call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif !error c c --- map global ittest,jttest to local itest,jtest if (ittest.gt.i0 .and. ittest.le.i0+ii .and. & jttest.gt.j0 .and. jttest.le.j0+jj ) then itest = ittest - i0 jtest = jttest - j0 else itest = -99 jtest = -99 endif c * if (mnproc.eq.1) then * write(lp,*) * endif !1st tile * call xcsync(flush_lp) * do k= 1,ijpr * if (mnproc.eq.k) then * write(lp,'(a,3i5)') 'mnproc,[ij]test =',mnproc,itest,jtest * endif * call xcsync(flush_lp) * enddo !k c c --- 'kdm ' = number of layers if (mnproc.eq.1) then write(lp,*) endif !1st tile call blkini(kdmblk,'kdm ') c #if defined(RELO) kdm = kdmblk kk = kdmblk c allocate( & dp0k(kdm), & ds0k(kdm), & sigma(kdm), & salmin(kdm) ) call mem_stat_add( 4*kdm ) #else if (kdmblk.ne.kdm) then if (mnproc.eq.1) then write(lp,'(/ a,i3 /)') & 'error - expected kdm =',kdm call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif !error #endif c c --- 'nhybrd' = number of hybrid levels (0=all isopycnal) c --- 'nsigma' = number of sigma levels (nhybrd-nsigma z-levels) c --- 'dp00' = deep z-level spacing minimum thickness (m) c --- 'dp00x' = deep z-level spacing maximum thickness (m) c --- 'dp00f' = deep z-level spacing stretching factor (1.0=const.z) c --- 'ds00' = shallow z-level spacing minimum thickness (m) c --- 'ds00x' = shallow z-level spacing maximum thickness (m) c --- 'ds00f' = shallow z-level spacing stretching factor (1.0=const.z) c --- 'dp00i' = deep iso-pycnal spacing minimum thickness (m) c --- 'isotop' = shallowest depth for isopycnal layers (m), <0 from file c c --- the above specifies a vertical coord. that is isopycnal or: c --- near surface z in deep water, based on dp00,dp00x,dp00f c --- near surface z in shallow water, based on ds00,ds00x,ds00f and nsigma c --- sigma between them, based on ds00,ds00x,ds00f and nsigma c c --- d[ps].k/d[ps].1 = d[ps]00f**(k-1) unless limited by d[ps]00x. c --- if d[ps]00f>1, d[ps]00x (> d[ps]00) is the maximum thickness. c --- if d[ps]00f<1, d[ps]00x (< d[ps]00) is the minimum thickness. c c --- near the surface (i.e. shallower than isotop), layers are always fixed c --- depth (z or sigma). layer 1 is always fixed, so isotop=0.0 is not c --- allowed. if isotop<0.0 then isotop(1:idm,1:jdm) is a spacially c --- varying array, input from the file iso.top.[ab]. c c --- away from the surface, the minimum layer thickness is dp00i. c --- to recover original hybrid behaviour, set dp00i=dp00x c --- for z-only, sigma-only or sigma-z only, set dp00i=dp00x c c --- for z-only set nsigma=0 (and ds00,ds00x,ds00f=dp00,dp00x,dp00f) c --- for sigma-z (shallow-deep) use a very small ds00 c --- (pure sigma-z also has ds00f=dp00f and ds00x=dp00x*ds00/dp00) c --- for z-sigma (shallow-deep) use a very large dp00 (not recommended) c --- for sigma-only set nsigma=kdm, dp00 large, and ds00 small c c --- for an entirely fixed vertical coordinate (no isopycnal layers), set c --- isotop large or make all target densities (sigma(k), below) very small. c c --- or, in place of 'dp00','dp00x','dp00f','ds00','ds00x','ds00f' specify: c --- 'dp0k ' = layer k deep z-level spacing minimum thickness (m) c --- k=1,kdm; dp0k must be zero for k>nhybrd c --- 'ds0k ' = layer k shallow z-level spacing minimum thickness (m) c --- k=1,nsigma c c --- uses version 2.2.58 definition of deep and shallow z-levels. c --- terrain following starts at depth dpns=sum(dp0k(k),k=1,nsigma) and c --- ends at depth dsns=sum(ds0k(k),k=1,nsigma), and the depth of the c --- k-th layer interface varies linearly with total depth between c --- these two reference depths. c c --- previous to 2.2.58, it was layer thickness (not layer interface c --- depth) that varied linearly with total depth. These two approachs c --- are identical for "pure sigma-z", but differ if ds00f/=dp00f. c call blkini(nhybrd,'nhybrd') call blkini(nsigma,'nsigma') call blkinr2(dp00,k, & 'dp00 ','(a6," =",f10.4," m")', & 'dp0k ','(a6," =",f10.4," m")' ) if (k.eq.1) then !dp00 call blkinr(dp00x, 'dp00x ','(a6," =",f10.4," m")') call blkinr(dp00f, 'dp00f ','(a6," =",f10.4," ")') call blkinr(ds00, 'ds00 ','(a6," =",f10.4," m")') call blkinr(ds00x, 'ds00x ','(a6," =",f10.4," m")') call blkinr(ds00f, 'ds00f ','(a6," =",f10.4," ")') else !dp0k dp0k(1) = dp00 dp00 = -1.0 !signal that dp00 is not input do k=2,kdm call blkinr(dp0k(k), 'dp0k ','(a6," =",f10.4," m")') c if (k.gt.nhybrd .and. dp0k(k).ne.0.0) then if (mnproc.eq.1) then write(lp,'(/ a,i3 /)') & 'error - dp0k must be zero for k>nhybrd' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif !k>nhybrd&dp0k(k)!=0 enddo !k do k=1,nsigma call blkinr(ds0k(k), 'ds0k ','(a6," =",f10.4," m")') enddo !k endif !dp00:dp0k call blkinr(dp00i, 'dp00i ','(a6," =",f10.4," m")') call blkinr(isotop,'isotop','(a6," =",f10.4," m")') c c --- isopycnal (MICOM-like) iff nhybrd is 0 isopyc = nhybrd .eq. 0 hybrid = .not. isopyc if (hybrid .and. nsigma.le.1) then nsigma=1 if (dp00.lt.0.0) then ds0k(1) = dp0k(1) endif endif if (isopyc .and. sigver.gt.2) then if (mnproc.eq.1) then write(lp,'(/ a /)') & 'error - MICOM-like requires the 7-term eqn. of state' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif c if (nhybrd.gt.kdm) then if (mnproc.eq.1) then write(lp,'(/ a,i3 /)') & 'error - maximum nhybrd is kdm =',kdm call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif !error if (nsigma.gt.nhybrd) then if (mnproc.eq.1) then write(lp,'(/ a,i3 /)') & 'error - maximum nsigma is nhybrd =',nhybrd call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif !error if (dp00.ge.0.0) then if (isopyc .and. max(dp00,dp00x).ne.0.0) then if (mnproc.eq.1) then write(lp,'(/ a /)') & 'error - must have dp00x==dp00==0.0 for isopycnal case' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif !error if (dp00f.eq.1.0 .and. dp00.ne.dp00x) then if (mnproc.eq.1) then write(lp,'(/ a /)') & 'error - must have dp00x==dp00 for dp00f==1.0' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif !error if (dp00f.gt.1.0 .and. dp00.ge.dp00x) then if (mnproc.eq.1) then write(lp,'(/ a /)') & 'error - dp00x must be > dp00 for dp00f>1' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif !error if (dp00f.lt.1.0 .and. dp00.le.dp00x) then if (mnproc.eq.1) then write(lp,'(/ a /)') & 'error - dp00x must be < dp00 for dp00f<1' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif !error if (ds00.gt.dp00) then if (mnproc.eq.1) then write(lp,'(/ a /)') & 'error - must have ds00 <= dp00' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif !error if (ds00.le.0.0 .and. .not.isopyc) then if (mnproc.eq.1) then write(lp,'(/ a /)') & 'error - must have ds00>0.0' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif !error if (ds00f.eq.1.0 .and. ds00.ne.ds00x) then if (mnproc.eq.1) then write(lp,'(/ a /)') & 'error - must have ds00x==ds00 for ds00f==1.0' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif !error if (ds00f.gt.1.0 .and. ds00.ge.ds00x) then if (mnproc.eq.1) then write(lp,'(/ a /)') & 'error - ds00x must be > ds00 for ds00f>1' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif !error if (ds00f.lt.1.0 .and. ds00.le.ds00x) then if (mnproc.eq.1) then write(lp,'(/ a /)') & 'error - ds00x must be < ds00 for ds00f<1' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif !error if (isotop.eq.0.0) then if (mnproc.eq.1) then write(lp,'(/ a /)') & 'error - isotop cannot be 0.0 (layer 1 never isopycnal)' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif !error endif !dp00 used c c --- 'saln0' = initial salinity value (psu), only used for iniflg<2 c --- 'locsig' = locally-referenced potential density for stability (0=F,1=T) c --- 'kapref' = thermobaric reference state (-1=input,0=none,1,2,3=constant) c --- 1=Arctic/Antarctic; 2=Atlantic; 3=Mediterranean c --- 'thflag' = reference pressure flag (0=Sigma-0, 2=Sigma-2) c --- this is a check on the compile-time stmt_funcs.h setup. if (mnproc.eq.1) then write(lp,*) endif !1st tile call blkinr(saln0, 'saln0 ','(a6," =",f10.4," psu")') call blkinl(locsig,'locsig') call blkini(kapref,'kapref') call blkini(thflag,'thflag') c --- kapnum is number of thermobaric reference states (1 or 2) if (kapref.ne.-1) then kapnum=1 else kapnum=2 endif c if (kapref.lt.-1 .or. kapref.gt.3) then if (mnproc.eq.1) then write(lp,'(/ a,i1 /)') & 'error - kapref must be between -1 and 3' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif !kapref error if (thflag.eq.0) then if (sigver.eq.1) then if (mnproc.eq.1) then write(lp,'(/ a /)') & 'equation of state is 7-term sigma-0' call flush(lp) endif !1st tile elseif (sigver.eq.3) then if (mnproc.eq.1) then write(lp,'(/ a /)') & 'equation of state is 9-term sigma-0' call flush(lp) endif !1st tile elseif (sigver.eq.5) then if (mnproc.eq.1) then write(lp,'(/ a /)') & 'equation of state is 17-term sigma-0' call flush(lp) endif !1st tile elseif (sigver.eq.7) then if (mnproc.eq.1) then write(lp,'(/ a /)') & 'equation of state is 12-term sigma-0' call flush(lp) endif !1st tile else if (mnproc.eq.1) then write(lp,'(/ a /)') & 'error - thflag not consistent with sig()' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif !7-term:9-term:error elseif (thflag.eq.2) then if (sigver.eq.2) then if (mnproc.eq.1) then write(lp,'(/ a /)') & 'equation of state is 7-term sigma-2' call flush(lp) endif !1st tile elseif (sigver.eq.4) then if (mnproc.eq.1) then write(lp,'(/ a /)') & 'equation of state is 9-term sigma-2' call flush(lp) endif !1st tile elseif (sigver.eq.6) then if (mnproc.eq.1) then write(lp,'(/ a /)') & 'equation of state is 17-term sigma-2' call flush(lp) endif !1st tile elseif (sigver.eq.8) then if (mnproc.eq.1) then write(lp,'(/ a /)') & 'equation of state is 12-term sigma-2' call flush(lp) endif !1st tile else if (mnproc.eq.1) then write(lp,'(/ a /)') & 'error - thflag not consistent with sig()' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif !7-term:9-term:error else if (mnproc.eq.1) then write(lp,'(/ a /)') & 'error - thflag must be 0 or 2' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif !thflag if (thflag.eq.0) then sigfmt = '(a6," =",f10.4," sigma-0")' elseif (thflag.eq.2) then sigfmt = '(a6," =",f10.4," sigma-2")' endif c c --- 'thbase' = reference density (sigma units) call blkinr(thbase,'thbase',sigfmt) c c --- 'vsigma' = spacially varying isopycnal layer target densities (0=F,1=T) c --- if true, target densities input from file iso.sigma.[ab] if (mnproc.eq.1) then write(lp,*) endif !1st tile call blkinl(vsigma,'vsigma') c c --- 'sigma ' = isopycnal layer target densities (sigma units) do k=1,kdm call blkinr(sigma(k),'sigma ',sigfmt) c if (k.gt.1) then if (sigma(k).le.sigma(k-1)) then if (mnproc.eq.1) then write(lp,'(/ a,i3 /)') & 'error - sigma is not stabally stratified' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif !sigma(k).le.sigma(k-1) endif !k>1 enddo !k c c --- 'iniflg' = initial state flag (0=level,1=zonal,2=climatology) c --- 'jerlv0' = initial jerlov water type (1 to 5; 0 kpar, -1 chl) if (mnproc.eq.1) then write(lp,*) endif !1st tile call blkini(iniflg,'iniflg') call blkini(jerlv0,'jerlv0') c if (iniflg.lt.0 .or. iniflg.gt.3) then !inicon==3 ok, for old .inputs if (mnproc.eq.1) then write(lp,'(/ a /)') & 'error - iniflg must be between 0 and 2' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif if (jerlv0.lt.-1 .or. jerlv0.gt.5) then if (mnproc.eq.1) then write(lp,'(/ a /)') & 'error - jerlv0 must be -1 or 0 or between 1 and 5' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif c c --- 'yrflag' = days in year flag (0=360,1=366,2=366Jan1,3=actual) c --- (-2=366Jan1 with 732-day forcing repeat) c --- 'sshflg' = diagnostic SSH flag (0=SSH,1=SSH&stericSSH) c --- note that sshflg==1 implies reading relax.ssh.a c --- 'dsurfq' = number of days between model diagnostics at the surface c --- (-ve to output only the .txt file at itest,jtest) c --- 'diagfq' = number of days between model diagnostics c --- (-ve same as -diagfq but always write archive at end) c --- 'proffq' = number of days between model diagnostics at selected locations c --- 'tilefq' = number of days between model diagnostics on selected tiles c --- 'meanfq' = number of days between model diagnostics (time averaged) c --- 'rstrfq' = number of days between model restart output c --- (-ve same as -rstrfq but no restart at end) c --- 'bnstfq' = number of days between baro nesting archive input c --- (-ve for mean archives spanning -bnstfq days; c --- 0.0 if lbflag is not 2 or 4) c --- 'nestfq' = number of days between 3-d nesting archive input c --- (-ve for mean archives spanning -nestfq days; c --- 0.0 turns off relaxation to 3-d nesting input) c --- 'cplifq' = number of days (or time steps) between sea ice coupling c --- (positive days or negative time steps) c --- 'baclin' = baroclinic time step (seconds), int. divisor of 86400 c --- 'batrop' = barotropic time step (seconds), int. divisor of baclin/2 if (mnproc.eq.1) then write(lp,*) endif !1st tile call blkini(yrflag,'yrflag') call blkini(sshflg,'sshflg') call blkinr(dsurfq,'dsurfq','(a6," =",f10.4," days")') call blkinr(diagfq,'diagfq','(a6," =",f10.4," days")') call blkinr(proffq,'proffq','(a6," =",f10.4," days")') call blkinr(tilefq,'tilefq','(a6," =",f10.4," days")') call blkinr(meanfq,'meanfq','(a6," =",f10.4," days")') call blkinr(rstrfq,'rstrfq','(a6," =",f10.4," days")') call blkinr(bnstfq,'bnstfq','(a6," =",f10.4, & " days (-ve mean span)")') call blkinr(nestfq,'nestfq','(a6," =",f10.4, & " days (-ve mean span)")') call blkinr(cplifq,'cplifq','(a6," =",f10.4, & " days (-ve time steps)")') call blkinr(baclin,'baclin','(a6," =",f10.4," sec")') call blkinr(batrop,'batrop','(a6," =",f10.4," sec")') c if (yrflag.eq.-2) then yrflag = 2 wndrep = 732.0d0 !two year forcing repeat period elseif (yrflag.eq. 2) then wndrep = 366.0d0 !one year forcing repeat period endif #if defined(RELO) if (yrflag.lt.2) then natm = 4 !monthly forcing else natm = 2 !high-frequency forcing endif #else if (yrflag.lt.2) then if (natm.lt.4) then if (mnproc.eq.1) then write(lp,'(/ a /)') & 'error - natm must be 4 for monthly forcing (yrflag==0,1)' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif else if (natm.ne.2) then if (mnproc.eq.1) then write(lp,'(/ a /)') & 'warning - natm can be 2 for this forcing (yrflag!=0,1)' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif endif #endif c dsur1p = dsurfq .lt. 0.0 if (dsur1p) then dsurfq = -dsurfq endif c arcend = diagfq.lt.0.0 diagfq = abs(diagfq) c if (cplifq.ge.0.0) then icpfrq = nint( cplifq*(86400.0/baclin) ) else icpfrq = nint(-cplifq) endif if (mnproc.eq.1) then write(lp,*) write(lp,'(a,i10)') 'icpfrq =',icpfrq endif !1st tile c if (yrflag.lt.0 .or. yrflag.gt.3) then if (mnproc.eq.1) then write(lp,'(/ a /)') & 'error - yrflag must be between 0 and 3' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif if (yrflag.le.1) then ! monthly forcing if (abs(nint(86400.0/baclin)-86400.0/baclin).gt.0.01) then if (mnproc.eq.1) then write(lp,'(/ a /)') & 'error - baclin not an integer divisor of 24 hours' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' else ! make it exact * write(lp,*) 'old baclin = ',baclin baclin = 86400.0/nint(86400.0/baclin) * write(lp,*) 'new baclin = ',baclin endif else ! high frequency forcing if (abs(nint(21600.0/baclin)-21600.0/baclin).gt.0.01) then if (mnproc.eq.1) then write(lp,'(/ a /)') & 'error - baclin not an integer divisor of 6 hours' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' else ! make it exact * write(lp,*) 'old baclin = ',baclin baclin = 21600.0/nint(21600.0/baclin) * write(lp,*) 'new baclin = ',baclin endif endif if (abs(nint(0.5*baclin/batrop)- & 0.5*baclin/batrop ).gt.0.01) then if (mnproc.eq.1) then write(lp,'(/ a /)') & 'error - batrop not an integer divisor of baclin/2' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' else ! make it exact * write(lp,*) 'old batrop = ',batrop batrop = baclin/nint(baclin/batrop) * write(lp,*) 'new batrop = ',batrop endif if (abs(nint((dsurfq*86400.d0)/baclin)- & (dsurfq*86400.d0)/baclin ).gt.0.01) then if (mnproc.eq.1) then write(lp,'(/ a,a /)') & 'error - ', & 'dsurfq is not a whole number of baroclinic time steps' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' else ! make it exact * write(lp,*) 'old dsurfq = ',dsurfq dsurfq = nint((dsurfq*86400.d0)/baclin)*(baclin/86400.d0) * write(lp,*) 'new dsurfq = ',dsurfq endif if (abs(nint((diagfq*86400.d0)/baclin)- & (diagfq*86400.d0)/baclin ).gt.0.01) then if (mnproc.eq.1) then write(lp,'(/ a,a /)') & 'error - ', & 'diagfq is not a whole number of baroclinic time steps' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' else ! make it exact * write(lp,*) 'old diagfq = ',diagfq diagfq = nint((diagfq*86400.d0)/baclin)*(baclin/86400.d0) * write(lp,*) 'new diagfq = ',diagfq endif if (abs(nint((proffq*86400.d0)/baclin)- & (proffq*86400.d0)/baclin ).gt.0.01) then if (mnproc.eq.1) then write(lp,'(/ a,a /)') & 'error - ', & 'proffq is not a whole number of baroclinic time steps' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' else ! make it exact * write(lp,*) 'old proffq = ',proffq proffq = nint((proffq*86400.d0)/baclin)*(baclin/86400.d0) * write(lp,*) 'new proffq = ',tilefq endif if (abs(nint((tilefq*86400.d0)/baclin)- & (tilefq*86400.d0)/baclin ).gt.0.01) then if (mnproc.eq.1) then write(lp,'(/ a,a /)') & 'error - ', & 'tilefq is not a whole number of baroclinic time steps' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' else ! make it exact * write(lp,*) 'old tilefq = ',tilefq tilefq = nint((tilefq*86400.d0)/baclin)*(baclin/86400.d0) * write(lp,*) 'new tilefq = ',tilefq endif if (abs(nint((meanfq*86400.d0)/baclin)- & (meanfq*86400.d0)/baclin ).gt.0.01) then if (mnproc.eq.1) then write(lp,'(/ a,a /)') & 'error - ', & 'meanfq is not a whole number of baroclinic time steps' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' else ! make it exact * write(lp,*) 'old meanfq = ',meanfq meanfq = nint((meanfq*86400.d0)/baclin)*(baclin/86400.d0) * write(lp,*) 'new meanfq = ',meanfq endif #if defined(RELO) if (nestfq.ne.0.0) then kknest = kdm else kknest = 1 endif #else if (kknest.ne.kdm .and. nestfq.ne.0.0) then if (mnproc.eq.1) then write(lp,'(/ a /)') & 'error - kknest (dimensions.h) must be kdm when nesting' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif #endif c c --- 'incflg' = incremental update flag (0=no, 1=yes, 2=full-velocity) c --- 'incstp' = no. timesteps for full update (1=full insertion) c --- 'incupf' = number of days of incremental updating input if (mnproc.eq.1) then write(lp,*) endif !1st tile call blkini(incflg, 'incflg') call blkini(incstp, 'incstp') call blkini(incupf, 'incupf') c c --- 'ra2fac' = weight for Robert-Asselin time filter c --- (old equivalent: wuv2=wts2=0.5*ra2fac, c --- wuv2>wts2 no longer supported) c --- 'wbaro ' = weight for time smoothing of barotropic fields c --- 'btrlfr' = leapfrog barotropic time step (0=F,1=T) c --- 'btrmas' = barotropic is mass conserving (0=F,1=T) c --- 'hybraf' = HYBGEN: Robert-Asselin flag (0=F,1=T) c --- (use 'hybraf'=0 to recover pre-2.2.38 behaviour) c --- 'hybrlx' = HYBGEN: inverse relaxation coefficient (time steps) c (1.0 for no relaxation) c --- 'hybiso' = HYBGEN: Use PCM if layer is within hybiso of target density c (0.0 for no PCM; large to recover pre-2.2.09 behaviour) c --- 'hybmap' = HYBGEN: remapper flag (0=PCM, 1=PLM, 2=PPM, 3=WENO-like) c --- 'hybflg' = HYBGEN: generator flag (0=T&S, 1=th&S, 2=th&T) c --- 'advflg' = thermal advection flag (0=T&S, 1=th&S, 2=th&T) c --- 'advtyp' = scalar advection type (0=PCM, 1=MPDATA, 2=FCT2, 4=FCT4) c --- 'momtyp' = momentum advection type (2=2nd order, 4=4th order) c --- 'slip' = +1 for free-slip, -1 for non-slip boundary conditions c --- 'visco2' = deformation-dependent Laplacian viscosity factor c --- 'visco4' = deformation-dependent biharmonic viscosity factor c --- 'facdf4' = speed-dependent biharmonic viscosity factor c --- (diffusion velocity is facdf4*|v|) c --- 'veldf2' = diffusion velocity (m/s) for Laplacian momentum dissipation c --- (negative to input spacially varying diffusion velocity) c --- 'veldf4' = diffusion velocity (m/s) for biharmonic momentum dissipation c --- (negative to input spacially varying diffusion velocity) c --- 'thkdf2' = diffusion velocity (m/s) for Laplacian thickness diffusion c --- 'thkdf4' = diffusion velocity (m/s) for biharmonic thickness diffusion c --- (negative to input spacially varying diffusion velocity) c --- 'temdf2' = diffusion velocity (m/s) for Laplacian temp/saln diffusion c --- 'temdfc' = temp diffusion conservation (0.0,1.0 all dens,temp resp.) c --- 'vertmx' = diffusion velocity (m/s) for mom.mixing at mix.layr.base c --- (vertmx only used in MICOM-like isopycnal mode) c --- 'cbar' = rms flow speed (m/s) for linear bottom friction c --- (negative to input spacially varying rms flow speed) c --- 'cb' = coefficient of quadratic bottom friction c --- (negative to input spacially varying coefficient) c --- 'drglim' = limiter for explicit friction (1.0 no limiter, 0.0 implicit) if (mnproc.eq.1) then write(lp,*) endif !1st tile call blkinr(ra2fac,'ra2fac','(a6," =",f10.4," ")') call blkinr(wbaro ,'wbaro ','(a6," =",f10.4," ")') call blkinl(btrlfr,'btrlfr') call blkinl(btrmas,'btrmas') call blkinl(hybraf,'hybraf') call blkinr(hybrlx,'hybrlx','(a6," =",f10.4," time steps")') call blkinr(hybiso,'hybiso','(a6," =",f10.4," kg/m^3")') call blkini(hybmap,'hybmap') call blkini(hybflg,'hybflg') call blkini(advflg,'advflg') call blkini(advtyp,'advtyp') call blkini(momtyp,'momtyp') call blkinr(slip, 'slip ', & '(a6," =",f10.4," (-1=no-slip, +1=free-slip)")') call blkinr(visco2,'visco2','(a6," =",f10.4," ")') call blkinr(visco4,'visco4','(a6," =",f10.4," ")') call blkinr(facdf4,'facdf4','(a6," =",f10.4," ")') call blkinr(veldf2,'veldf2','(a6," =",f10.4, & " m/s (-ve if variable)")') call blkinr(veldf4,'veldf4','(a6," =",f10.4, & " m/s (-ve if variable)")') call blkinr(thkdf2,'thkdf2','(a6," =",f10.4," m/s")') call blkinr(thkdf4,'thkdf4','(a6," =",f10.4, & " m/s (-ve if variable)")') call blkinr(temdf2,'temdf2','(a6," =",f10.4," m/s")') call blkinr(temdfc,'temdfc', & '(a6," =",f10.4," (0.0,1.0 conserve dens,temp resp.)")') call blkinr(vertmx,'vertmx','(a6," =",f10.4," m/s")') call blkinr(cbar, 'cbar ','(a6," =",f10.4, & " m/s (-ve if variable)")') call blkinr(cb, 'cb ','(a6," =",f10.4, & " (-ve if variable)")') call blkinr(drglim,'drglim','(a6," =",f10.4," ")') c if (hybrlx.lt.1.0) then if (mnproc.eq.1) then write(lp,'(/ a /)') & 'error - hybrlx must be at least 1.0' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif qhybrlx = 1.0/hybrlx c if (btrmas) then if (mnproc.eq.1) then write(lp,'(/ a /)') & 'error - btrmas (.true.) not yet implemented' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif isopcm = hybiso.gt.0.0 !use PCM for isopycnal layers? if (hybmap.lt.0 .or. hybmap.gt.3) then if (mnproc.eq.1) then write(lp,'(/ a,a /)') & 'error - hybmap must be ', & '0 (PCM) or 1 (PLM) or 2 (PPM) or 3 (WENO-like)' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif if (hybflg.lt.0 .or. hybflg.gt.2) then if (mnproc.eq.1) then write(lp,'(/ a /)') & 'error - hybflg must be 0 (T&S) or 1 (th&S) or 2 (th&T)' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif if (hybflg.ne.0 .and. (sigver.eq.5 .or. sigver.eq.6)) then if (mnproc.eq.1) then write(lp,'(/ a /)') & 'error - hybflg must be 0 (T&S) for 17-term eqn. of state' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif if (advflg.lt.0 .or. advflg.gt.2) then if (mnproc.eq.1) then write(lp,'(/ a /)') & 'error - advflg must be 0 (T&S) or 1 (th&S) or 2 (th&T)' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif if (advflg.ne.0 .and. (sigver.eq.5 .or. sigver.eq.6)) then if (mnproc.eq.1) then write(lp,'(/ a /)') & 'error - advflg must be 0 (T&S) for 17-term eqn. of state' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif if (advflg.eq.2) then if (mnproc.eq.1) then write(lp,'(/ a /)') & 'error - advflg==2 (th&T) not yet implemented' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif if (advtyp.ne.0 .and. advtyp.ne.1 .and. & advtyp.ne.2 .and. advtyp.ne.4 ) then if (mnproc.eq.1) then write(lp,'(/ a,a /)') & 'error - advtyp must be 0,1,2,4', & ' (PCM,MPDATA,FCT2,FCT4)' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif if (momtyp.ne.2 .and. momtyp.ne.4) then if (mnproc.eq.1) then write(lp,'(/ a /)') & 'error - montyp must be 2 or 4' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif if (momtyp.eq.2) then if (facdf4.ne.0.0) then if (mnproc.eq.1) then write(lp,'(/ a /)') & 'error - facdf4 must be 0.0 for montyp==2' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif endif if (momtyp.eq.4) then if (visco2.ne.0.0 .or. veldf2.ne.0.0) then if (mnproc.eq.1) then write(lp,'(/ a /)') & 'error - visco2 and veldf2 must be 0.0 for montyp==4' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif endif if (slip.ne.-1.0 .and. slip.ne.1.0) then if (mnproc.eq.1) then write(lp,'(/ a /)') & 'error - slip must be -1.0 (no-slip) or +1.0 (free-slip)' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif if (thkdf2.ne.0.0 .and. thkdf4.ne.0.0) then if (mnproc.eq.1) then write(lp,'(/ a /)') & 'error - only one of thkdf2 and thkdf4 can be non-zero' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif if (isopyc .and. temdfc.ne.0.0) then if (mnproc.eq.1) then write(lp,'(/ a /)') & 'error - isopycnal mode must have temdfc=0.0' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif if (temdfc.lt.0.0 .or. temdfc.gt.1.0) then if (mnproc.eq.1) then write(lp,'(/ a /)') & 'error - temdfc must be between 0.0 and 1.0' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif if (temdfc.ne.1.0 .and. (sigver.eq.5 .or. sigver.eq.6)) then if (mnproc.eq.1) then write(lp,'(/ a /)') & 'error - temdfc must be 1.0 (all T) for 17-term eqn. of state' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif c c --- 'thkbot' = thickness of bottom boundary layer (m) c --- 'sigjmp' = minimum density jump across interfaces (kg/m**3) c --- 'tmljmp' = equivalent temperature jump across mixed-layer (degC) c --- 'thkmls' = reference mixed-layer thickness for SSS relaxation (m) c --- 'thkmlt' = reference mixed-layer thickness for SST relaxation (m) c --- 'thkriv' = nominal thickness of river inflow (m) if (mnproc.eq.1) then write(lp,*) endif !1st tile call blkinr(thkbot,'thkbot','(a6," =",f10.4," m")') call blkinr(sigjmp,'sigjmp','(a6," =",f10.4," kg/m**3")') call blkinr(tmljmp,'tmljmp','(a6," =",f10.4," degC")') call blkinr(thkmls,'thkmls','(a6," =",f10.4," m")') call blkinr(thkmlt,'thkmlt','(a6," =",f10.4," m")') call blkinr(thkriv,'thkriv','(a6," =",f10.4," m")') c c --- 'thkcdw' = thickness for near-surface currents in ice-ocean stress (m) c --- 'thkfrz' = maximum thickness of near-surface freezing zone (m) c --- 'iceflg' = sea ice model flag (0=none,1=energy loan,1>coupled/esmf) c --- 2=2-way,3=no IO stress, 4=3+no ocean currents c --- also, icmflg=3 for ENLN relaxed to coupler ice concentration c --- 'tfrz_0' = ice melting point (degC) at S=0psu c --- 'tfrz_s' = gradient of ice melting point (degC/psu) c --- 'frzifq' = e-folding time scale back to tfrz c --- (positive days or negative time steps) c --- 'ticegr' = ENLN: vertical temperature gradient inside ice (deg/m) c --- (0.0 to get ice surface temp. from atmos. surtmp) c --- 'hicemn' = ENLN: minimum ice thickness (m) c --- 'hicemx' = ENLN: maximum ice thickness (m) c --- 'ishelf' = ice shelf flag (0=none,1=ice shelf over ocean) c if (mnproc.eq.1) then write(lp,*) endif !1st tile call blkinr(thkcdw,'thkcdw','(a6," =",f10.4," m")') call blkinr(thkfrz,'thkfrz','(a6," =",f10.4," m")') call blkini(iceflg,'iceflg') icegln = iceflg.eq.1 !ENLN, but see icmflg.eq.3 below c if (iceflg.lt.0 .or. iceflg.gt.4) then if (mnproc.eq.1) then write(lp,'(/ a /)') & 'error - iceflg must be between 0 and 4' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif c c --- to recover original ENLN model use: c --- tfrz_0=-1.8, tfrz_s=0.0, ticegr=2.0, hicemn=0.5, hicemx=10.0. c --- for freezing point linear in S, typically use: c --- tfrz_0=0.0, tfrz_s=-0.054, ticegr=0.0, hicemn=0.5, hicemx=10.0. c call blkinr(tfrz_0,'tfrz_0','(a6," =",f10.4," degC")') call blkinr(tfrz_s,'tfrz_s','(a6," =",f10.4," degC/psu")') call blkinr(frzifq,'frzifq','(a6," =",f10.4, & " days (-ve time steps)")') call blkinr(ticegr,'ticegr','(a6," =",f10.4," degC/m")') call blkinr(hicemn,'hicemn','(a6," =",f10.4," m")') call blkinr(hicemx,'hicemx','(a6," =",f10.4," m")') c if (frzifq.ge.0.0) then icefrq = nint( frzifq*(86400.0/baclin) ) else icefrq = nint(-frzifq) endif if (mnproc.eq.1) then write(lp,*) write(lp,'(a,i10)') 'icefrq =',icefrq endif !1st tile c call blkini(ishelf,'ishelf') c c --- 'ntracr' = number of tracers (0=none,negative to initialize) c --- 'trcflg' = tracer flags (one digit per tracer, most sig. replicated) c --- 0: passive, 100% at surface c --- 1: passive, psudo-silicate c --- 2: passive, temperature c --- 3: passive c --- 4-8: unused c --- 9: default biology (NPZ-3,NPZD-4,Chai-9) c if (mnproc.eq.1) then write(lp,*) endif !1st tile call blkini(ntracr,'ntracr') trcrin = ntracr.gt.0 ! positive from restart, otherwise initialize trcout = ntracr.ne.0 ntracr = abs(ntracr) c if (ntracr.gt.mxtrcr) then if (mnproc.eq.1) then write(lp,'(/ a,i3, a /)') & 'error - maximum ntracr is',mxtrcr, & ' (recompile with larger mxtrcr)' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif c call blkini(trcflg1,'trcflg') do k= 1,ntracr trcflg(k) = mod(trcflg1,10) ! least significant decimal digit if (trcflg1.ge.10) then trcflg1 = trcflg1/10 ! shift by one decimal digit else ! replicate last decimal digit across remaining tracers endif if (mnproc.eq.1) then write(lp,'(a,i3,i2)') ' k,trcflg =',k,trcflg(k) endif !1st tile if (trcflg(k).gt.3 .and. trcflg(k).lt.9) then !not 0,1,2,3,9 if (mnproc.eq.1) then write(lp,'(/ a,i3 /)') & 'error - unknown tracer type for tracer',k call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif enddo !k c c --- 'tsofrq' = number of time steps between anti-drift offset calcs c --- 'tofset' = temperature anti-drift offset (degC/century) c --- 'sofset' = salnity anti-drift offset (psu/century) c if (mnproc.eq.1) then write(lp,*) endif !1st tile call blkini(tsofrq,'tsofrq') call blkinr(tofset,'tofset','(a6," =",f10.4," degC/century")') call blkinr(sofset,'sofset','(a6," =",f10.4," psu/century")') c c --- convert from per century to per second. tofset = tofset / (100.d0*365.d0*86400.d0) sofset = sofset / (100.d0*365.d0*86400.d0) c c --- 'mlflag' = mixed layer flag (0=none,1=KPP,2-3=KTa-b,4=PWP,5=MY2.5,6=GISS) c --- 'mxlkpp' = KPP: activate mixed layer model (mlflag==1) c --- 'mxlkrt' = KT: MICOM or HYCOM Kraus-Turner (mlflag==2,3) c --- 'mxlkta' = KT: activate original mixed layer model (mlflag==2) c --- 'mxlktb' = KT: activate alternative mixed layer model (mlflag==3) c --- 'mxlpwp' = PWP: activate mixed layer model (mlflag==4) c --- 'mxlmy ' = MY: activate mixed layer model (mlflag==5) c --- 'mxlgiss' = GISS: activate mixed layer model (mlflag==6) c --- 'pensol' = KT/PWP activate penetrating solar radiation (0=F,1=T) c --- 'dtrate' = KT: maximum permitted m.l. detrainment rate (m/day) c --- 'thkmin' = KT/PWP: minimum mixed-layer thickness (m) c --- 'dypflg' = KT/PWP: diapycnal mixing flag (0=none,1=KPP,2=explicit) c --- always none (0) for MY/GISS and explicit (2) for PWP c --- 'mixfrq' = KT/PWP: number of time steps between diapycnal mixing calcs c --- 'diapyc' = KT/PWP: diapycnal diffusivity x buoyancy freq. (m**2/s**2) c --- 'rigr' = PWP: critical gradient richardson number c --- 'ribc' = PWP: critical bulk richardson number c --- 'rinfty' = KPP: maximum gradient richardson number (shear inst.) c --- 'ricr' = KPP: critical bulk richardson number c --- 'bldmin' = KPP: minimum surface boundary layer thickness (m) c --- 'bldmax' = KPROF: maximum surface boundary layer thickness (m) c --- 'cekman' = KPP/KT: scale factor for Ekman depth c --- 'cmonob' = KPP: scale factor for Monin-Obukov depth c --- 'bblkpp' = KPP: activate bottom boundary layer (0=F,1=T) c --- 'shinst' = KPP: activate shear instability mixing (0=F,1=T) c --- 'dbdiff' = KPP: activate double diffusion mixing (0=F,1=T) c --- 'nonloc' = KPP: activate nonlocal b. layer mixing (0=F,1=T) c --- 'botdiw' = KPROF: activate bot.enhan.int.wav mixing (0=F,1=T) c --- 'difout' = KPROF: output visc/diff coffs in archive (0=F,1=T) c --- 'difsmo' = KPROF: number of layers with horiz smooth diff coeffs c --- 'difm0' = KPP: max viscosity due to shear instability (m**2/s) c --- 'difs0' = KPP: max diffusivity due to shear instability (m**2/s) c --- 'difmiw' = KPP/MY: background/internal wave viscosity (m**2/s) c --- (negative to input spacially varying viscosity) c --- 'difsiw' = KPP/MY: background/internal wave diffusivity (m**2/s) c --- (negative to input spacially varying diffusivity) c --- 'dsfmax' = KPP: salt fingering diffusivity factor (m**2/s) c --- 'rrho0' = KPP: salt fingering rp=(alpha*delT)/(beta*delS) c --- 'cs' = KPP: value for nonlocal flux term c --- 'cstar' = KPP: value for nonlocal flux term c --- 'cv' = KPP: buoyancy frequency ratio (0.0 to use a fn. of N) c --- 'c11' = KPP: value for turb velocity scale c --- 'hblflg' = KPP: b. layer interpolation flag (0=con.,1=lin.,2=quad.) c --- 'niter' = KPP: iterations for semi-implicit soln. (2 recomended) c --- 'langmr' = KPP: Langmuir flag (0=no;1=Sul;2=Smy;3=Har;4=Tak) c --- 0:None c --- 1:McWilliams-Sullivan c --- 2:Smyth c --- 3:McWilliams-Harcourt c --- 4:Takaya c if (mnproc.eq.1) then write(lp,*) endif !1st tile call blkini(mlflag,'mlflag') c if (mlflag.lt.0 .or. mlflag.gt.6) then if (mnproc.eq.1) then write(lp,'(/ a /)') & 'error - mlflag must be between 0 and 6' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif c if (isopyc .and. mlflag.ne.2) then if (mnproc.eq.1) then write(lp,'(/ a /)') & 'error - isopycnal mode requires KT mixed layer (mlflag=2)' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif c mxlkta = mlflag.eq.2 .and. hybrid mxlktb = mlflag.eq.3 .and. hybrid mxlkrt = mlflag.eq.2 .or. mlflag.eq.3 call blkinl(pensol,'pensol') call blkinr(dtrate,'dtrate','(a6," =",f10.4," m/day")') call blkinr(thkmin,'thkmin','(a6," =",f10.4," m")') call blkini(dypflg,'dypflg') call blkini(mixfrq,'mixfrq') call blkinr(diapyc,'diapyc','(a6," =",f10.4," m**2/s**2")') c if (isopyc .and. pensol) then if (mnproc.eq.1) then write(lp,'(/ a /)') & 'error - isopycnal mode not consistent with pensol' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif c if (dypflg.lt.0 .or. dypflg.gt.2) then if (mnproc.eq.1) then write(lp,'(/ a /)') & 'error - dypflg must be between 0 and 2' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif c if ((mxlkta .or. mxlktb) .and. & dypflg.ne.0 .and. thkriv.gt.0.0) then if (mnproc.eq.1) then write(lp,'(/ a /)') & 'error - thkriv>0 not consistent with KT unless dypflg=1' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif c mxlmy = mlflag.eq.5 c if (mxlmy) then #if ! defined(RELO) if (kkmy25.ne.kdm) then if (mnproc.eq.1) then write(lp,'(/ a /)') & 'error - kkmy25 (dimensions.h) must be kdm when mlflag==5' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif #endif if (dypflg.ne.0) then if (mnproc.eq.1) then write(lp,'(/ a /)') & 'warning - dypflg reset to 0 for M-Y 2.5' call flush(lp) endif !1st tile dypflg = 0 endif endif c mxlgiss = mlflag.eq.6 c if (mxlgiss) then #if ! defined(RELO) if (nlgiss.ne.762) then if (mnproc.eq.1) then write(lp,'(/ a /)') & 'error - nlgiss (dimensions.h) must be 762 when mlflag==6' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif #endif if (dypflg.ne.0) then if (mnproc.eq.1) then write(lp,'(/ a /)') & 'warning - dypflg reset to 0 for GISS' call flush(lp) endif !1st tile dypflg = 0 endif endif c mxlpwp = mlflag.eq.4 call blkinr(rigc ,'rigr ','(a6," =",f10.4," ")') call blkinr(ribc ,'ribc ','(a6," =",f10.4," ")') call blkinr(qrinfy,'rinfty','(a6," =",f10.4," ")') qrinfy = 1.0/qrinfy call blkinr(ricr ,'ricr ','(a6," =",f10.4," ")') c if (mxlpwp .and. dypflg.ne.2) then if (mnproc.eq.1) then write(lp,'(/ a /)') & 'warning - dypflg reset to 2 for PWP mixed layer' call flush(lp) endif !1st tile dypflg = 2 endif c if (mxlpwp .and. thkriv.gt.0.0) then if (mnproc.eq.1) then write(lp,'(/ a /)') & 'error - thkriv>0 not consistent with PWP mixed layer' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif c call blkinr(bldmin,'bldmin','(a6," =",f10.4," m")') call blkinr(bldmax,'bldmax','(a6," =",f10.4," m")') c call blkinr(cekman,'cekman','(a6," =",f10.4," ")') call blkinr(cmonob,'cmonob','(a6," =",f10.4," ")') c mxlkpp = mlflag.eq.1 call blkinl(bblkpp,'bblkpp') call blkinl(shinst,'shinst') call blkinl(dbdiff,'dbdiff') call blkinl(nonloc,'nonloc') call blkinl(botdiw,'botdiw') call blkinl(difout,'difout') call blkini(difsmo,'difsmo') !now an integer call blkinr(difm0 ,'difm0 ','(a6," =",f10.4," m**2/s")') call blkinr(difs0 ,'difs0 ','(a6," =",f10.4," m**2/s")') call blkinr(difmiw,'difmiw','(a6," =",f10.4, & " m**2/s (-ve if variable)")') call blkinr(difsiw,'difsiw','(a6," =",f10.4, & " m**2/s (-ve if variable)")') call blkinr(dsfmax,'dsfmax','(a6," =",f10.4," m**2/s")') call blkinr(rrho0 ,'rrho0 ','(a6," =",f10.4," ")') call blkinr(cs ,'cs ','(a6," =",f10.4," ")') call blkinr(cstar ,'cstar ','(a6," =",f10.4," ")') call blkinr(cv ,'cv ','(a6," =",f10.4," ")') call blkinr(c11 ,'c11 ','(a6," =",f10.4," ")') call blkini(hblflg,'hblflg') call blkini(niter ,'niter ') call blkini(lngblk,'langmr') !lngblk is local for testing 0 <= 4 c #if defined(STOKES) langmr = lngblk #else if (lngblk.ne.0) then if (mnproc.eq.1) then write(lp,'(/ 2a /)') & 'error - langmr must be =0 unless the macro STOKES', & ' is defined at compile time' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif #endif if (difsiw*difmiw.lt.0.0) then if (mnproc.eq.1) then write(lp,'(/ 2a /)') & 'error - difmiw and difsiw must either both be positive or', & ' both be negative' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif c if (hblflg.lt.0 .or. hblflg.gt.2) then if (mnproc.eq.1) then write(lp,'(/ 2a /)') & 'error - hblflg must be', & ' 0 (constant) or 1 (linear) or 2 (quadratic)' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif c if (mxlkpp) then c --- for KPP, diapyc and vertmx are not used dypflg = 0 diapyc = 0.0 vertmx = 0.0 endif if (mxlmy) then c --- for M-Y, diapyc and vertmx are not used diapyc = 0.0 vertmx = 0.0 endif if (mxlgiss) then c --- for GISS, diapyc and vertmx are not used diapyc = 0.0 vertmx = 0.0 endif if (mxlpwp) then c --- for PWP, vertmx is not used vertmx = 0.0 endif if (mxlkta .or. mxlktb) then c --- for HYCOM KT, vertmx is not currently used vertmx = 0.0 endif c if (dypflg.eq.2) then if (max(tofset,sofset).gt.0.0) then if (diapyc.le.0.0) then if (mnproc.eq.1) then write(lp,'(/ a /)') & 'error - diapyc must be positive if [ts]ofset is' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' elseif (mixfrq.ne.tsofrq) then if (mnproc.eq.1) then write(lp,'(/ a /)') & 'error - mixfrq and tsofrq must be equal' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif !error checks endif ![ts]ofset>0.0 endif !dypflg.eq.2 c c --- 'fltflg' = FLOATS: synthetic float flag (0=no; 1=yes) c --- 'nfladv' = FLOATS: advect every nfladv bacl. time steps (even, >=4) c --- 'nflsam' = FLOATS: output (0=every nfladv steps; >0=# of days) c --- 'intpfl' = FLOATS: horiz. interp. (0=2nd order+bilinear; 1=bilinear) c --- 'iturbv' = FLOATS: add horiz. turb. advection velocity (0=no; 1=yes) c --- 'ismpfl' = FLOATS: sample water properties at float (0=no; 1=yes) c --- 'tbvar' = FLOATS: horizontal turbulent velocity variance scale c --- 'tdecri' = FLOATS: inverse decorrelation time scale c call blkini(fltflg,'fltflg') synflt = fltflg.ge.1 call blkini(nfladv,'nfladv') call blkini(nflsam,'nflsam') call blkini(intpfl,'intpfl') call blkini(iturbv,'iturbv') turbvel = iturbv.ge.1 call blkini(ismpfl,'ismpfl') samplfl = ismpfl.ge.1 call blkinr(tbvar ,'tbvar ','(a6," =",f10.4," m**2/s**2")') call blkinr(tdecri,'tdecri','(a6," =",f10.4," 1/day")') c c --- 'lbflag' = lateral baro. bndy flag (0=none;nest:2=B-K,4=Flather) c --- (port: 1=Browning-Kreiss,3=Flather) c --- 'tidflg' = TIDES: tidal forcing flag (0=no;1=bdy;2=body;3=bdy&body) c --- 'tidein' = TIDES: tide field input flag (0=no;1=yes;2=sal) c --- 'tidcon' = TIDES: 1 digit per constituent (Q1K2P1N2O1K1S2M2), 0=off,1=on c --- 'tidsal' = TIDES: scalar self attraction and loading factor c --- (negative to input spacially varying SAL factor) c --- 'tiddrg' = TIDES: tidal drag flag (0=no;1=scalar;2=tensor) c --- 'thkdrg' = TIDES: thickness of bottom boundary layer for tidal drag (m) c --- (zero to apply tidal drag to barotropic mode) c --- 'drgscl' = TIDES: scale factor for tidal drag c --- 'tidgen' = TIDES: generic time (0=F,1=T) c --- 'tidrmp' = TIDES: ramp time (days) c --- 'tid_t0' = TIDES: origin for ramp time (model day) if (mnproc.eq.1) then write(lp,*) endif !1st tile call blkini(lbflag, 'lbflag') call blkini(tidflg, 'tidflg') call blkini(tidein, 'tidein') call blkini(tidcon, 'tidcon') call blkinr(tidsal, 'tidsal','(a6," =",f10.4, & " (-ve if variable)")') call blkini(tiddrg, 'tiddrg') call blkinr(thkdrg, 'thkdrg','(a6," =",f10.4, & " m (0 if barotropic)")') call blkinr(drgscl, 'drgscl','(a6," =",f10.4," ")') call blkinl(tidgen, 'tidgen') call blkinr(ramp_time ,'tidrmp','(a6," =",f10.4," days")') call blkin8(ramp_orig ,'tid_t0','(a6," =",f10.4," model day")') !real*8 c if (tidflg.lt.0 .or. tidflg.gt.3) then if (mnproc.eq.1) then write(lp,'(/ a /)') & 'error - tidflg must be between 0 and 3' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif if (tidflg.ge.2 .and. .not.tidgen .and. yrflag.ne.3) then if (mnproc.eq.1) then write(lp,'(/ a /)') & 'error - tidgen must be .true. for body tide and yrflag.ne.3' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif if (tidflg.gt.0) then if (abs(nint(3600.0/baclin)-3600.0/baclin).gt.0.01) then if (mnproc.eq.1) then write(lp,'(/ a /)') & 'error - baclin not an integer divisor of 1 hour' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' else ! make it exact * write(lp,*) 'old baclin = ',baclin baclin = 3600.0/nint(3600.0/baclin) * write(lp,*) 'new baclin = ',baclin endif endif if (tidein.lt.0 .or. tidein.gt.2) then if (mnproc.eq.1) then write(lp,'(/ a /)') & 'error - tidein must be between 0 and 2' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif if (tidein.gt.0 .and. tidflg.lt.2) then if (mnproc.eq.1) then write(lp,'(/ a /)') & 'error - tidein implies input but there is no body tide' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif if (tiddrg.lt.0 .or. tiddrg.gt.2) then if (mnproc.eq.1) then write(lp,'(/ a /)') & 'error - tiddrg must be between 0 and 2' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif if (tiddrg.eq.0 .and. drgscl.ne.0.0) then if (mnproc.eq.1) then write(lp,'(/ a /)') & 'error - tiddrg=0 must have drgscl=0.0' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif if (tiddrg.ne.0 .and. drgscl.le.0.0) then if (mnproc.eq.1) then write(lp,'(/ a /)') & 'error - tiddrg>0 must have drgscl>0.0' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif if (tiddrg.eq.2 .and. thkdrg.ne.0.0) then c --- tensor drag only implemented on barotropic velocity if (mnproc.eq.1) then write(lp,'(/ a /)') & 'error - tiddrg=2 only implemented for thkdrg=0.0' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif c c --- 'clmflg' = climatology frequency flag (6=bimonthly,12=monthly) c --- 'wndflg' = wind stress input flag (0=none,1=uv-grid,2,3=p-grid,4,5=wnd10m) c --- (=3 wind speed from wind stress; =4,5 wind stress from wind) c --- (=4 for COARE 3.0; =5 for COREv2 bulk parameterization) c --- 'ustflg' = ustar forcing flag (3=input,1,2=wndspd,4=stress) c --- 'flxflg' = thermal forcing flag (0=none,3=net_flux,1-2,4-6=sst-based) c --- (=1 MICOM bulk parameterization) c --- (=2 Kara bulk parameterization) c --- (=4 COARE bulk parameterization, approx.) c --- (=5 L&Y bulk parameterization) c --- (=6 COARE bulk parameterization, approx., better pressure) c --- 'empflg' = E-P forcing flag (0=none,3=net_E-P, 1-2,4-6=sst-based_E) c --- (flxflg to use model sst, -flxflg to use seatmp) c --- 'dswflg' = diurnal shortwv flag (0=none,1=daily to diurnal correction) c --- 'albflg' = ocean albedo flag (0=none,1=const,2=L&Y) c --- 'sssflg' = SSS relaxation flag (0=none,1=clim,-1=clim&rmx) c --- see thermf.f for a description of sssrmx c --- 'lwflag' = longwave corr. flag (0=none,1=clim,2=nwp,-1=lwdn), sst-based c --- 'sstflg' = SST relaxation flag (0=none,1=clim,2=atmos,3=observed) c --- 'icmflg' = ice mask flag (0=none,1=clim,2=atmos,3=obs/coupled) c --- 'prsbas' = msl prs is input field + prsbas (Pa) c --- 'mslprf' = msl prs forcing flag (0=F,1=T) c --- 'stroff' = net strs offset flag (0=F,1=T) c --- 'flxoff' = net flux offset flag (0=F,1=T) c --- 'flxsmo' = smooth surface fluxes (0=F,1=T) if (mnproc.eq.1) then write(lp,*) endif !1st tile call blkini(clmflg,'clmflg') call blkini(wndflg,'wndflg') call blkini(ustflg,'ustflg') call blkini(flxflg,'flxflg') call blkini(empflg,'empflg') call blkini(dswflg,'dswflg') call blkini(albflg,'albflg') call blkini(sssflg,'sssflg') call blkini(lwflag,'lwflag') call blkini(sstflg,'sstflg') call blkini(icmflg,'icmflg') call blkinr(prsbas,'prsbas','(a6," =",f10.1," Pa")') call blkinl(mslprf,'mslprf') call blkinl(stroff,'stroff') call blkinl(flxoff,'flxoff') call blkinl(flxsmo,'flxsmo') c if (clmflg.ne.6 .and. clmflg.ne.12) then if (mnproc.eq.1) then write(lp,'(/ a /)') & 'error - clmflg must be 6 or 12' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif #if defined(RELO) if (lbflag.eq.1 .or. lbflag.eq.3) then if (mnproc.eq.1) then write(lp,'(/ a /)') & 'error - lbflag 1 and 3 not supported with dynamic memory' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif #endif if (lbflag.lt.0 .or. lbflag.gt.4) then if (mnproc.eq.1) then write(lp,'(/ a /)') & 'error - lbflag must be between 0 and 4' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif if (lbflag.ne.2 .and. lbflag.ne.4 .and. bnstfq.ne.0.0) then if (mnproc.eq.1) then write(lp,'(/ a /)') & 'error - bnstfq must be 0.0 unless lbflag is 2 or 4' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif if (wndflg.lt.0 .or. wndflg.gt.5) then if (mnproc.eq.1) then write(lp,'(/ a /)') & 'error - wndflg must be between 0 and 5' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif if (ustflg.lt.1 .or. ustflg.gt.4) then if (mnproc.eq.1) then write(lp,'(/ a /)') & 'error - ustflg must be between 1 and 4' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif if (flxflg.lt.0 .or. flxflg.gt.6) then if (mnproc.eq.1) then write(lp,'(/ a /)') & 'error - flxflg must be between 0 and 6' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif if (flxflg.gt.0 .and. & wndflg.eq.0 ) then if (mnproc.eq.1) then write(lp,'(/ a /)') & 'error - wndflg must be non-zero when flxflg>0' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif if (flxflg.eq.3 .and. & ustflg.eq.4 ) then if (mnproc.eq.1) then write(lp,'(/ a /)') & 'error - ustflg must be 1,2,3 when flxflg==3' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif if (abs(empflg).lt.0 .or. abs(empflg).gt.6) then if (mnproc.eq.1) then write(lp,'(/ a /)') & 'error - empflg must be between 0 and 6' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif if (flxflg.eq.3 .and. (empflg.ne.0 .and. empflg.ne.3)) then if (mnproc.eq.1) then write(lp,'(/ a /)') & 'error - empflg must be 0 or 3 when flxflg==3' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif if (abs(empflg).ne.flxflg .and. empflg.ne.0 & .and. empflg.ne.3) then if (mnproc.eq.1) then write(lp,'(/ a /)') & 'error - empflg must be 0 or 3 or +\-flxflg' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif if (empflg.lt.0 .and. sstflg.lt.2 .and. lwflag.ne.2) then if (mnproc.eq.1) then write(lp,'(/ a,a /)') & 'error - negative empflg requires sst forcing', & ' (i.e. sstflg=3 or sstflg=2 or lwflag=2)' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif if (flxflg.eq.0 .and. & empflg.ne.0 ) then if (mnproc.eq.1) then write(lp,'(/ a /)') & 'error - empflg must be 0 when flxflg==0' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif if (flxflg.eq.3 .and. & dswflg.eq.1 ) then if (mnproc.eq.1) then write(lp,'(/ a /)') & 'error - dswflg must be 0 when flxflg==3' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif if (flxflg.eq.6 .and. .not.mslprf) then if (mnproc.eq.1) then write(lp,'(/ a /)') & 'error - mslprf must be .true. when flxflg==6' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif c if (albflg.gt.0 .and. lwflag.ne.-1) then if (mnproc.eq.1) then write(lp,'(/ a /)') & 'error - albflg>0 requires lwflag=-1' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif if (lwflag.lt.-1 .or. lwflag.gt.2) then if (mnproc.eq.1) then write(lp,'(/ a /)') & 'error - lwflag must be between -1 and 2' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif if (lwflag.ne.0 .and. & flxflg.eq.0 ) then if (mnproc.eq.1) then write(lp,'(/ a /)') & 'error - flxflg must non-zero when lwflag is non-zero' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif c if (wndflg.eq.0) then stroff = .false. !no wind forcing endif c if (flxflg.eq.0) then flxoff = .false. !no thermal forcing endif c if (iceflg.eq.0) then icmflg = 0 !no ice ticegr = 2.0 !surtmp not needed for ice temperature elseif (iceflg.ge.2) then icegln = icmflg.eq.3 !ENLN plus relax to coupler ice concentration endif c if (icmflg.lt.0 .or. icmflg.gt.3) then if (mnproc.eq.1) then write(lp,'(/ a /)') & 'error - icmflg must be between 0 and 3' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' elseif (icmflg.eq.1) then if (mnproc.eq.1) then write(lp,'(/ a /)') & 'error - icmflg 1 not yet implemented' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' elseif (icmflg.eq.3 .and. iceflg.eq.1) then if (mnproc.eq.1) then write(lp,'(/ a /)') & 'error - icmflg 3 not yet implemented for iceflg==1' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif c if (icmflg.eq.3 .and. icefrq.lt.icpfrq) then if (mnproc.eq.1) then write(lp,'(/ a /)') & 'error - icefrq (frzifq) smaller than icpfrq (cplifq)' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif c if (sstflg.lt.0 .or. sstflg.gt.3) then if (mnproc.eq.1) then write(lp,'(/ a /)') & 'error - sstflg must be between 0 and 3' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif if (sstflg.gt.1 .and. & yrflag.lt.2 ) then if (mnproc.eq.1) then write(lp,'(/ a,a /)') & 'error - yrflag must be >1 (high frequency forcing)', & ' when sstflg>1' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif c if (sssflg.lt.-1 .or. sssflg.gt.2) then if (mnproc.eq.1) then write(lp,'(/ a /)') & 'error - sssflg must be 0 or 1 or -1' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif c c --- s w i t c h e s (if set to .true., then...) c --- (due to a SGI bug: read in an integer with 0=F,1=T) c --- windf use wind stress forcing (wndflg>0) c --- thermo use thermodynamic forcing c --- pensol use penetrating solar radiation (input above) c --- pcipf use E-P forcing (may be redefined in forfun) c --- priver rivers as a precipitation bogas c --- epmass treat evap-precip as a mass exchange c c --- srelax activate surface salinity climatological nudging c --- trelax activate surface temperature climatological nudging c --- relax activate lateral boundary T/S/p climatological nudging c --- trcrlx activate lateral boundary tracer climatological nudging c --- relaxt input tracer climatological relaxation fields c --- relaxf input T/S/p climatological relaxation fields c --- (note that relaxt implies relaxf) c --- relaxs input surface climatological relaxation fields only c windf = wndflg.ne.0 thermo = flxflg.ne.0 pensol = pensol .and. thermo pcipf = empflg.ne.0 ! if .true., might later be set .false. by forfun c if (mnproc.eq.1) then write(lp,*) endif !1st tile call blkinl(relax, 'relax ') call blkinl(trcrlx,'trcrlx') call blkinl(priver,'priver') call blkinl(epmass,'epmass') if (mnproc.eq.1) then write(lp,*) endif !1st tile c if (priver .and. .not.thermo) then if (mnproc.eq.1) then write(lp,'(/ a /)') & 'error - priver must be .false. for flxflg=0' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif c if (epmass .and. .not.thermo) then if (mnproc.eq.1) then write(lp,'(/ a /)') & 'error - epmass must be .false. for flxflg=0' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif c srelax = sssflg.eq.1 .or. sssflg.eq.-1 trelax = sstflg.eq.1 c if (.not.(thermo .or. sstflg.gt.0 .or. srelax)) then niter=1 elseif (mxlkta) then if (mnproc.eq.1) then write(lp,'(/ a / a /)') & 'error - KT mixed layer needs thermal forcing, i.e.', & ' mlflag=2 needs max(sstflg,sstflg,flxflg)>0' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif !.not(thermo ...):mxlkta c relaxt = trcout .and. (trcrlx .or. & (.not.trcrin .and. iniflg.eq.2)) relaxf = relax & .or. srelax & .or. trelax & .or. lwflag.eq.1 & .or. relaxt relaxs = .not. relax & .and. relaxf #if defined(STOKES) c c --- s w i t c h e s for Stokes Drift effects (0=F, 1=T) c c --- 'stdflg' = STOKES: add Stokes Drift velocities to kinematics and dynamics c --- 'stdsur' = STOKES: add Stokes Drift Surface Stresses to dynamics c --- 'stdbot' = STOKES: add Stokes Waves Field bottom friction drag c c --- s w i t c h e s for Stokes Drift effects (Integers) c c --- 'nsdzi ' = STOKES: number of interfaces in Stokes Drift input c c --- since they are at the end of blkdat.input they can optionally be c --- present even if the macro STOKES is not defined at compile time. c call blkinl(stdflg,'stdflg') call blkinl(stdsur,'stdsur') call blkinl(stdbot,'stdbot') call blkini(nsdzi ,'nsdzi ') c if (nsdzi .lt.0) then if (mnproc.eq.1) then write(lp,'(/ a /)') & 'error - nsdzi must be 0 (no Stokes drift) or positive' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif if (nsdzi .eq.0 .and. stdflg) then if (mnproc.eq.1) then write(lp,'(/ a /)') & 'error - nsdzi must be > 0 with stdflg' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif if (nsdzi .eq.0 .and. stdbot) then if (mnproc.eq.1) then write(lp,'(/ a /)') & 'error - nsdzi must be > 0 with stdbot' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif if (nsdzi .eq.0 .and. langmr.ne.0) then if (mnproc.eq.1) then write(lp,'(/ a /)') & 'error - nsdzi must be > 0 with langmr >0' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif #endif c close(unit=uoff+99) !file='blkdat.input' c c --- initialize from climatology (update relaxf and relaxs)? if (iniflg.eq.2) then #if defined(USE_CCSM3) relaxf = .true. relaxs = .false. #else open(unit=uoff+99,file=trim(flnminp)//'limits') !on all nodes read(uoff+99,*) day1 close(unit=uoff+99) !file='limits' if (day1.le.0.0) then relaxf = .true. relaxs = .false. endif !initialize from climatology #endif /* USE_CCSM3:else */ endif c #if defined(RELO) if (relaxf .and. .not. relaxs) then kkwall = kdm elseif (relaxt) then kkwall = kdm !needed for tracers else kkwall = 1 endif if (mnproc.eq.1) then write(lp,'(a,i10)') 'kkwall =',kkwall write(lp,*) endif !1st tile #else if (kkwall.ne.kdm .and. relaxf .and. .not. relaxs) then if (mnproc.eq.1) then write(lp,'(/ a /)') & 'error - kkwall (dimensions.h) must be kdm for 3-d clim' call flush(lp) endif !1st tile call xcstop('(blkdat)') stop '(blkdat)' endif #endif #if defined(USE_CCSM3) c c --- i/o file names c --- directory names (eg, flnmgrdd) are read in from namelist in ccsm3_io c flnmshlf = trim(flnmdepd)//'regional.iceshelf' flnmdep = trim(flnmdepd)//'regional.depth' flnmgrd = trim(flnmgrdd)//'regional.grid' flnmarc = trim(flnmarcd)//'archv.0000_000_00' flnmarcs = trim(flnmarcd)//'archs.0000_000_00' flnmarcm = trim(flnmarcd)//'archm.0000_000' flnmarct = trim(flnmarcd)//'archt.0000_000_00' flnmovr = trim(flnmovrd)//'ovrtn.txt' flnmflx = 'flxdp' c c --- i/o directory names c flnmforw = trim(flnmrlxd) flnmfor = trim(flnmrlxd) #elif defined(OCEANS2) if (nocean.eq.2) then c --- slave HYCOM works from ./OCEAN2 c c --- i/o file names c flnmshlf = './OCEAN2/regional.iceshelf' flnmdep = './OCEAN2/regional.depth' flnmgrd = './OCEAN2/regional.grid' flnmarc = './OCEAN2/archv.0000_000_00' flnmarcs = './OCEAN2/archs.0000_000_00' flnmarcm = './OCEAN2/archm.0000_000_00' flnmarct = './OCEAN2/archt.0000_000_00' flnmovr = './OCEAN2/ovrtn_out' flnmflx = './OCEAN2/flxdp_out' flnmrsi = './OCEAN2/restart_in' flnmrso = './OCEAN2/restart_out' c c --- i/o directory names c flnmfor = './OCEAN2/' flnmforw = './OCEAN2/' else c --- master HYCOM c c --- i/o file names c flnmshlf = 'regional.iceshelf' flnmdep = 'regional.depth' flnmgrd = 'regional.grid' flnmarc = 'archv.0000_000_00' flnmarcs = 'archs.0000_000_00' flnmarcm = 'archm.0000_000_00' flnmarct = 'archt.0000_000_00' flnmovr = 'ovrtn_out' flnmflx = 'flxdp_out' flnmrsi = 'restart_in' flnmrso = 'restart_out' c c --- i/o directory names c flnmfor = './' flnmforw = './' endif #else c c --- i/o file names c flnmshlf = 'regional.iceshelf' flnmdep = 'regional.depth' flnmgrd = 'regional.grid' flnmarc = 'archv.0000_000_00' flnmarcs = 'archs.0000_000_00' flnmarcm = 'archm.0000_000_00' flnmarct = 'archt.0000_000_00' flnmovr = 'ovrtn_out' flnmflx = 'flxdp_out' flnmrsi = 'restart_in' flnmrso = 'restart_out' c c --- i/o directory names c flnmfor = './' flnmforw = './' #endif /* USE_CCSM3:OCEANS2:else */ return end subroutine blkinr(rvar,cvar,cfmt) use mod_xc ! HYCOM communication interface use mod_cb_arrays ! HYCOM saved arrays implicit none c real rvar character cvar*6,cfmt*(*) c c read in one real value c character*6 cvarin c read(uoff+99,*) rvar,cvarin if (mnproc.eq.1) then write(lp,cfmt) cvarin,rvar call flush(lp) endif !1st tile c if (cvar.ne.cvarin) then if (mnproc.eq.1) then write(lp,*) write(lp,*) 'error in blkinr - input ',cvarin, + ' but should be ',cvar write(lp,*) call flush(lp) endif !1st tile call xcstop('(blkinr)') stop endif return end subroutine blkinr2(rvar,nvar,cvar1,cfmt1,cvar2,cfmt2) use mod_xc ! HYCOM communication interface use mod_cb_arrays ! HYCOM saved arrays implicit none c real rvar integer nvar character cvar1*6,cvar2*6,cfmt1*(*),cfmt2*(*) c c read in one real value c identified as either cvar1 (return nvar=1) or cvar2 (return nvar=2) c character*6 cvarin c read(uoff+99,*) rvar,cvarin if (cvar1.eq.cvarin) then nvar = 1 if (mnproc.eq.1) then write(lp,cfmt1) cvarin,rvar call flush(lp) endif !1st tile elseif (cvar2.eq.cvarin) then nvar = 2 if (mnproc.eq.1) then write(lp,cfmt2) cvarin,rvar call flush(lp) endif !1st tile else if (mnproc.eq.1) then write(lp,*) write(lp,*) 'error in blkinr2 - input ',cvarin, + ' but should be ',cvar1,' or ',cvar2 write(lp,*) call flush(lp) endif !1st tile call xcstop('(blkinr2)') stop endif return end subroutine blkin8(rvar,cvar,cfmt) use mod_xc ! HYCOM communication interface use mod_cb_arrays ! HYCOM saved arrays implicit none c real*8 rvar character cvar*6,cfmt*(*) c c read in one real*8 value c character*6 cvarin c read(uoff+99,*) rvar,cvarin if (mnproc.eq.1) then write(lp,cfmt) cvarin,rvar call flush(lp) endif !1st tile c if (cvar.ne.cvarin) then if (mnproc.eq.1) then write(lp,*) write(lp,*) 'error in blkin8 - input ',cvarin, + ' but should be ',cvar write(lp,*) call flush(lp) endif !1st tile call xcstop('(blkin8)') stop endif return end subroutine blkini(ivar,cvar) use mod_xc ! HYCOM communication interface use mod_cb_arrays ! HYCOM saved arrays implicit none c integer ivar character*6 cvar c c read in one integer value c character*6 cvarin c read(uoff+99,*) ivar,cvarin if (mnproc.eq.1) then write(lp,6000) cvarin,ivar call flush(lp) endif !1st tile c if (cvar.ne.cvarin) then if (mnproc.eq.1) then write(lp,*) write(lp,*) 'error in blkini - input ',cvarin, + ' but should be ',cvar write(lp,*) call flush(lp) endif !1st tile call xcstop('(blkini)') stop endif return 6000 format(a6,' =',i10) end subroutine blkinl(lvar,cvar) use mod_xc ! HYCOM communication interface use mod_cb_arrays ! HYCOM saved arrays implicit none c logical lvar character*6 cvar c c read in one logical value c due to a SGI bug for logical I/O: read in an integer 0=F,1=T c character*6 cvarin integer ivar c read(uoff+99,*) ivar,cvarin lvar = ivar .ne. 0 if (mnproc.eq.1) then write(lp,6000) cvarin,lvar call flush(lp) endif !1st tile c if (cvar.ne.cvarin) then if (mnproc.eq.1) then write(lp,*) write(lp,*) 'error in blkinl - input ',cvarin, + ' but should be ',cvar write(lp,*) call flush(lp) endif !1st tile call xcstop('(blkinl)') stop endif return 6000 format(a6,' =',l10) end c> c> Revision history c> c> Oct. 1999 - added variables to control penetrating solar radiation c> Oct. 1999 - added switch to select mixed layer model c> Oct. 1999 - dp00 for hybgen is now set here c> Dec. 1999 - multiple heat flux transfer coefficients (cts1, cts2, ctl) c> replace old coefficient ct c> Jan. 2000 - changed to subroutine with run-time input c> May. 2000 - conversion to SI units c> Nov. 2000 - added kapflg,thflag,hybflg,advflg,wndflg c> Dec. 2000 - added flxflg c> Aug. 2001 - added bnstfq,nestfq c> Aug. 2001 - added mapflg==4 for an f-plane c> Aug. 2001 - betard and betabl inverted to replace division by multiply c> May 2002 - map projection via regional.grid file (see geopar.f) c> May 2002 - vertical coordinate via d[ps]00* c> May 2002 - diffusion variable names include 2/4 for Laplacian/biharmonic c> May 2002 - added PWP and MY2.5 mixed layer options c> May 2002 - added thkmlr, distinct from thkmin c> Aug 2002 - added ntracr and trcflg to control tracers c> Nov 2002 - added jerlv0=0 to use kpar-based turbidity c> Nov 2002 - split thkmlr into thkmls and thkmlt c> Apr 2003 - added dp00i, vsigma, and priver c> May 2003 - added bldmin, bldmax, flxsmo, and icmflg c> Jun 2003 - added locsig and removed thflag=4 c> Oct 2003 - thkdf4 negative now signals spacial variation c> Nov 2003 - added advtyp c> Jan 2004 - added latdiw c> Jan 2004 - added bblkpp c> Jan 2004 - added hblflg and cv=0.0 option c> Feb 2004 - added botdiw (and latdiw) for GISS c> Feb 2004 - added temdfc c> Mar 2004 - added thkriv and epmass c> Mar 2004 - added isotop c> Mar 2005 - added tfrz_0,tfrz_s,ticegr,hicemn,hicemx c> Mar 2005 - added tsofrq,tofset,sofset c> Mar 2005 - added empflg c> Mar 2005 - added ustflg, reordered thermal forcing flags c> Mar 2005 - added flxoff c> Apr 2005 - replaced kapflg with kapref c> Jun 2005 - added hybrlx c> Jun 2006 - added cplifq, thkfrz and negative dsurfq option c> Nov 2006 - version 2.2 c> Nov 2006 - added incflg,incstp,incupf c> Nov 2006 - added FLOATS (fltflg,...) c> Nov 2006 - added TIDES (tidflg,tidrmp,tid_t0,lbflag==3) c> Mar 2007 - added drgscl c> Mar 2007 - added drglim c> Mar 2007 - added tidcon,tidsal,tidgen c> Apr 2007 - implemented meanfq c> Apr 2007 - added btrlfr and btrmas (latter not yet implemented) c> May 2007 - added wbaro c> Jun 2007 - moved h1 to momtum c> Jun 2007 - added momtyp and facdf4 c> Sep 2007 - added hybmap and hybiso c> Feb 2008 - added thkdrg c> Feb 2008 - added sshflg c> Jun 2008 - added tilefq c> Jul 2008 - added hybmap=3 (WENO-like) c> Oct 2008 - added dp0k and ds0k input option c> Oct 2008 - added dswflg c> Dec 2008 - difsmo is now an integer number of layers c> Jan 2009 - added -ve diagfq (arcend) c> Jun 2009 - added sssrmx c> Mar 2010 - added negative bnstfq and nestfq for mean nesting archives c> Apr 2010 - added sstflg=-1 for sssrmx array input (no sssrmx blkdat entry) c> Apr 2010 - removed latdiw c> Apr 2010 - added proffq c> Oct 2010 - added support for 17-term and 12-term equation of state c> Nov 2010 - added yrflag=-2 c> Nov 2010 - empflg negative to use seatmp instead of hycom sst c> Apr 2011 - added negative cbar c> Jul 2011 - added negative tidsal c> Aug 2011 - added ra2fac, removed global wts[12] and wuv[12] c> Aug 2011 - added hybraf c> Sep 2011 - added negative cb c> Nov 2011 - iniflg=2 now active for yrflag=3 c> Nov 2011 - added frzifq c> Jan 2012 - added thkcdw c> Jan 2012 - added lbflag=4 c> Mar 2012 - new terrain following method, based on dpns and dsns c> Apr 2012 - added negative tidflg, to set tidef c> May 2012 - added tidein, replaces negative tidflg c> Nov 2012 - added OCEANS2 macro for master/slave HYCOM c> Nov 2012 - added wndlfg=4 for 10m wind component input c> Nov 2012 - added stroff, usualy used with wndflg=4 c> Jan 2013 - added tiddrg, set to 0 or 1 for backwards compatibility c> Jan 2013 - added zero thkdrg to apply tidal drag to barotropic mode c> June 2013 - added lbflag=6 c> July 2013 - added negative (spacially varying) difmiw and difsiw c> July 2013 - added 3 Stokes Drift Flags: stkflg,stksur,stkbot c> Aug 2013 - added langmr flag for KPP and Stokes Drift c> Sep 2013 - added number of interfaces in Stokes Drift Files c> Oct 2013 - added jerlv0=-1 to use chlorophyll-based turbidity c> Oct 2013 - fixed srelax used before defined bug c> Nov 2013 - added wndlfg=5 for 10m wind component input, COREv2 stress c> Nov 2013 - added flxlfg=5 for COREv2 heat flux c> Nov 2013 - added lwflag=-1 for radflx=Qlwdn c> Nov 2013 - added albflg for ocean albedo, >0 for shwflx=Qswdn c> Jan 2014 - added prsbas and mslprf for sea level pressure forcing c> Jan 2014 - /consts/ replaced by parameters c> Jan 2014 - kdm is defined here when macro /* RELO */ is set c> Jan 2014 - natm is defined here when macro /* RELO */ is set c> Jan 2014 - kkwall is defined here when macro /* RELO */ is set c> Jan 2014 - kknest is defined here when macro /* RELO */ is set c> Jan 2014 - lbflag 1 and 3 not supported with dynamic memory allocation c> Apr 2014 - added ishelf and flnmshlf c> May 2014 - removed lbflag=6 c> Sep 2014 - langmr can now be 0 to 4 c> Oct 2014 - added flxlfg=6