PROGRAM test_fluxtable_hur


! PURPOSE: Used to test the flux table (flux_table_hur.f90). 
!          Shows the structure of the main program and calling 
!          sequence of include files and subroutines.

!             - The correct calling sequence greatly 
!               improves the time efficiency of the flux table.
!               This is important when incorporting the flux table 
!               into a larger model. 

!              - The steps for using the flux table are labeled 
!                in sequential order below 




!(1) Access module

!     - MODULE used to store flux table data and associated 
!       transfer coefficients 


USE flux_hur




IMPLICIT NONE

!(2) Declare and define input/output variables for the flux table

!     - If no input data file then follow (2a)
!     - If reading input data file then follow (2b)  

!     - Input variables: 'u' wind speed [m/s]
!                        'v' wind speed [m/s]
!                        sea surface temperature [Celsius]
!                        air temperature [Celsius]
!                        reference height [m]
!                        significant wave height [m]
!                        'u' orbital velocity [m/s]
!                        'v' orbital velocity [m/s]
!                        specific humidity (surface) [kg/kg]
!                        specific humidity (ref. height) [kg/kg]
!                        surface pressure [Pa]


!    - Output variables: 'u' component of stress  [N/m^2]
!                        'v' component of stress  [N/m^2]
!                         sensible heat flux  [W/m^2]
!                         latent heat flux  [W/m^2]



!(2a) 

!REAL :: u, v, sst, at, ref_ht, Hsig, u_orb, v_orb, qs, q, press
!REAL :: tau_u, tau_v, shf, lhf


!u = 15.7
!v = 0.0
!sst = 6.1
!at = 5.2  
!ref_height = 10.0 
!Hsig = 0.0 
!u_orb = 0.0 
!v_orb = 0.0 
!qs = 0.006 
!q = 0.005 
!press = 101325.0
  


!(2b) If input data being read then call your read subroutine
!     (e.g. read_your_data.f90)

!    - Input variables not being read in must be defined 

INTEGER i
INTEGER, PARAMETER :: dim=51
REAL, DIMENSION(dim) :: u,sst,at,qs,q
REAL :: v,ref_height,Hsig,u_orb,v_orb,press
REAL tau_u,tau_v,shf,lhf
REAL,DIMENSION(dim) :: tauu_out,tauv_out,shf_out,lhf_out


! Variables not read in are defined as follows

v = 0.0
ref_height = 10.0
u_orb = 0.0
v_orb = 0.0
Hsig = 0.0
press = 101325.0

! Read input data

CALL read_your_data(u,at,qs,q,sst)





!(3)  Call subroutine (read_data_hur.f90) to read in flux table data
!     and associated transfer coefficients

CALL read_data_hur




!(4) Call flux table (flux_table_hur.f90)
 
!     - If (2a) then follow (4a)
!     - If (2b) then follow (4b)


!     - Output variables:  'u' stress [N/m^2]
!                          'v' stress [N/m^2]
!                           sensible heat flux [W/m^2]
!                           latent heat flux [W/m^2]   


!(4a)

!CALL flux_table_hur(u,v,sst,at,ref_ht,Hsig,u_orb,v_orb,qs,q, &
!                    press,tau_u,tau_v,shf,lhf)


! Print output (u-stress, v-stress, shf, lhf)
 
!WRITE(*,*) 'tau_u = ', tau_u
!WRITE(*,*) 'tau_v = ', tau_v
!WRITE(*,*) 'shf = ', shf
!WRITE(*,*) 'lhf = ', lhf


!(4b)

DO i=1,51


CALL flux_table_hur(u(i),v,sst(i),at(i),ref_height, &
                    Hsig,u_orb,v_orb,qs(i),q(i),press, &
                    tau_u,tau_v,shf,lhf)



!Output from flux table (e.g. u-stress, v-stress, shf, and lhf)

!     - In this example output variables are written to a 
!       file (output_hur90.dat) for comparison purposes

        tauu_out(i) = tau_u
        tauv_out(i) = tau_v
        shf_out(i) = shf
        lhf_out(i) = lhf

END DO


!Compare output file to 'example_output_hur90.dat'
OPEN(UNIT=20, file='output_hur90.dat', STATUS='UNKNOWN',ACTION='WRITE')

DO i=1,14

WRITE(20,*) i,tauu_out(i),shf_out(i),lhf_out(i)
END DO
       
CLOSE (UNIT=20)


END PROGRAM test_fluxtable_hur