C $Header: /u/gcmpack/MITgcm/pkg/ctrl/ctrl.h,v 1.79 2016/05/09 11:39:00 mlosch Exp $ C $Name: $ c ================================================================== c HEADER CONTROLVARS c ================================================================== c c o Control variables of the ECCO state estimation tool. c c Depending on the specific problem to be studied users will have to c modify this header file. c c started: Christian Eckert eckert@mit.edu 30-Jun-1999 c c ================================================================== c HEADER CONTROLVARS ctrl.h c ================================================================== integer maxcvars #if (defined (CTRL_SET_OLD_MAXCVARS_30)) parameter ( maxcvars = 30 ) #elif (defined (CTRL_SET_OLD_MAXCVARS_40)) parameter ( maxcvars = 40 ) #elif (defined (ALLOW_GENARR2D_CONTROL) || defined (ALLOW_GENARR3D_CONTROL) || defined (ALLOW_GENTIM2D_CONTROL)) parameter ( maxcvars = 400 ) #else parameter ( maxcvars = 60 ) #endif cph ctrlprec will be set to 32 for ECCO to reduce I/O cph but jeopardizes some gradient checks, so should be cph set to 64 by default. cph Need to put this in namelist at some point! integer ctrlprec #ifdef CTRL_SET_PREC_32 parameter ( ctrlprec = 32 ) #else parameter ( ctrlprec = 64 ) #endif #ifdef ALLOW_ADMTLM integer admtlmrec parameter( admtlmrec = Nx*Ny*(4*Nr+1) ) common / controlvars_admtlm_r / & cbuffGlobal _RL cbuffGlobal( admtlmrec ) #endif common /controlparams_r/ & delZexp, & forcingPrecond _RL delZexp _RL forcingPrecond C doInitXX :: at iter 0 only, set ctrls to 0 and write to xx*000.data C doMainPack :: pack adxx*data files into ecco_cost_* file (usually for optim.x) C doMainUnpack :: unpack ecco_ctrl_* file (usually from optim.x) into xx_*data files C doPackDiag :: output diag_pack*/diag_unpack* files during ctrl_pack/ctrl_unpack C doSinglePrecTapelev :: reduce precision of ad tape files to float32 (only used in pkg/autodiff ...) C ctrlSmoothCorrel2D :: use pkg/smooth correlation operator (incl. smoother) for 2D controls (Weaver, Courtier 01) C ctrlSmoothCorrel3D :: use pkg/smooth correlation operator (incl. smoother) for 3D controls (Weaver, Courtier 01) C ctrlUseGen :: use generic control approach rather than old codes from pkg/ecco common /controlvars_l / & ctrlSmoothCorrel2D, & ctrlSmoothCorrel3D, & ctrlUseGen, & doInitXX, & doAdmTlm, & doPackDiag, & doZscaleUnpack, & doZscalePack, & doMainUnpack, & doMainPack, & doSinglePrecTapelev, & doAdmtlmBypassAD logical ctrlSmoothCorrel2D, ctrlSmoothCorrel3D logical ctrlUseGen logical doInitXX logical doAdmTlm logical doPackDiag logical doZscaleUnpack logical doZscalePack logical doMainUnpack logical doMainPack logical doSinglePrecTapelev logical doAdmtlmBypassAD common /controlvars_i/ & nvartype, & nvarlength, & ncvarindex, & ncvarrecs, & ncvarrecstart, & ncvarrecsend, & ncvarxmax, & ncvarymax, & ncvarnrmax, & nwetctile, & nwetstile, & nwetwtile, & nwetvtile, & nwetcglobal, & nwetsglobal, & nwetwglobal, & nwetvglobal, & nbuffglobal integer nvartype integer nvarlength integer ncvarindex ( maxcvars ) integer ncvarrecs ( maxcvars ) integer ncvarrecstart ( maxcvars ) integer ncvarrecsend ( maxcvars ) integer ncvarxmax ( maxcvars ) integer ncvarymax ( maxcvars ) integer ncvarnrmax ( maxcvars ) integer nwetctile ( nsx,nsy,nr ) integer nwetstile ( nsx,nsy,nr ) integer nwetwtile ( nsx,nsy,nr ) integer nwetvtile ( nsx,nsy,nr ) integer nwetcglobal ( nr ) integer nwetsglobal ( nr ) integer nwetwglobal ( nr ) integer nwetvglobal ( nr ) integer nbuffglobal #ifdef ALLOW_SHIFWFLX_CONTROL common /controlvars_i_shifwflx/ & nwetitile, nwetiglobal, filenWetiGlobal integer nwetitile ( nsx,nsy,nr ) integer nwetiglobal ( nr ) integer filenWetiGlobal(nr) #endif /* ALLOW_SHIFWFLX_CONTROL */ common /controlvars_c/ & ncvargrd & , yadprefix character*(1) ncvargrd(maxcvars) character*(2) yadprefix common /controlvec_header_i/ & filenvartype, & filenvarlength, & fileOptimCycle, & filencbuffindex, & fileIg, & fileJg, & fileI, & fileJ, & filensx, & filensy, & filek, & filenWetcGlobal, & filenWetsGlobal, & filenWetwGlobal, & filenWetvGlobal, & filencvarindex, & filencvarrecs, & filencvarxmax, & filencvarymax, & filencvarnrmax integer filenvartype integer filenvarlength integer fileOptimCycle integer filencbuffindex integer fileIg integer fileJg integer fileI integer fileJ integer filensx integer filensy integer filek integer filenWetcGlobal(nr) integer filenWetsGlobal(nr) integer filenWetwGlobal(nr) integer filenWetvGlobal(nr) integer filencvarindex(maxcvars) integer filencvarrecs(maxcvars) integer filencvarxmax(maxcvars) integer filencvarymax(maxcvars) integer filencvarnrmax(maxcvars) common /controlvec_header_r/ & filefc _RL filefc common /controlvec_header_c/ & fileYctrlid, & filencvargrd character*(10) fileYctrlid character*( 1) filencvargrd(maxcvars) c Define unit weight as a placeholder common /ctrl_weights_unit_r/ & wunit, & wareaunit _RL wunit (nr,nsx,nsy) _RL wareaunit (1-olx:snx+olx,1-oly:sny+oly,nsx,nsy) cph common /controlvars_r/ cph & tmpfld2d cph & , tmpfld3d _RL tmpfld2d & (1-olx:snx+olx,1-oly:sny+oly,nsx,nsy) _RL tmpfld3d & (1-olx:snx+olx,1-oly:sny+oly,nr,nsx,nsy) common /packnames_c/ & yadmark, & ctrlname, & costname, & scalname, & maskname, & metaname, & yctrlid, & yctrlposunpack, & yctrlpospack character*2 yadmark character*9 ctrlname character*9 costname character*9 scalname character*9 maskname character*9 metaname character*10 yctrlid character*4 yctrlposunpack character*4 yctrlpospack #ifdef ALLOW_ADMTLM integer maxm, maxn parameter ( maxm = Nx*Ny*(4*Nr+1), maxn=Nx*Ny*(4*Nr+1) ) common /admtlm_i/ nveccount integer nveccount common /admtlm_r/ phtmpadmtlm double precision phtmpadmtlm(maxn) #endif #ifdef ECCO_CTRL_DEPRECATED _RL num_zero_mean (nsx,nsy) _RL objf_zero_mean (nsx,nsy) _RL objf_zero_smoo (nsx,nsy) common /ctrl_zero_r/ num_zero_mean, & objf_zero_mean, objf_zero_smoo #endif #ifndef ALLOW_ECCO common /ctrl_weights_atmos_r/ & whflux, & wsflux, & wtauu, & wtauv, & watemp, & waqh, & wprecip, & wswflux, & wswdown, & wuwind, & wvwind, & wlwflux, & wlwdown, & wevap, & wsnowprecip, & wapressure, & wrunoff, & wsst, & wsss _RL whflux (1-olx:snx+olx,1-oly:sny+oly,nsx,nsy) _RL wsflux (1-olx:snx+olx,1-oly:sny+oly,nsx,nsy) _RL wtauu (1-olx:snx+olx,1-oly:sny+oly,nsx,nsy) _RL wtauv (1-olx:snx+olx,1-oly:sny+oly,nsx,nsy) _RL watemp (1-olx:snx+olx,1-oly:sny+oly,nsx,nsy) _RL waqh (1-olx:snx+olx,1-oly:sny+oly,nsx,nsy) _RL wprecip (1-olx:snx+olx,1-oly:sny+oly,nsx,nsy) _RL wswflux (1-olx:snx+olx,1-oly:sny+oly,nsx,nsy) _RL wswdown (1-olx:snx+olx,1-oly:sny+oly,nsx,nsy) _RL wuwind (1-olx:snx+olx,1-oly:sny+oly,nsx,nsy) _RL wvwind (1-olx:snx+olx,1-oly:sny+oly,nsx,nsy) _RL wlwflux (1-olx:snx+olx,1-oly:sny+oly,nsx,nsy) _RL wlwdown (1-olx:snx+olx,1-oly:sny+oly,nsx,nsy) _RL wevap (1-olx:snx+olx,1-oly:sny+oly,nsx,nsy) _RL wsnowprecip (1-olx:snx+olx,1-oly:sny+oly,nsx,nsy) _RL wapressure(1-olx:snx+olx,1-oly:sny+oly,nsx,nsy) _RL wrunoff (1-olx:snx+olx,1-oly:sny+oly,nsx,nsy) _RL wsst (1-olx:snx+olx,1-oly:sny+oly,nsx,nsy) _RL wsss (1-olx:snx+olx,1-oly:sny+oly,nsx,nsy) #endif c Control variables: c ================== c c xx_theta - control vector temperature part. c xx_salt - control vector salt part. c xx_hflux - control vector surface heat flux part. c xx_sflux - control vector surface salt flux part. c xx_tauu - control vector zonal wind stress part. c xx_tauv - control vector meridional wind stress part. cph( c xx_... are to be replaced by tmpfld2d/3d throughout the code; c control variables are written to / read from active files c TAMC sees xx_..._dummy #ifdef ALLOW_OPENAD C common /controlvars_r_openad/ & xx_place_holder # ifdef ECCO_CTRL_DEPRECATED & , xx_theta & , xx_salt & , xx_uvel & , xx_vvel & , xx_etan # ifdef ALLOW_DIFFKR_CONTROL & , xx_diffkr # endif # ifdef ALLOW_KAPGM_CONTROL & , xx_kapgm # endif # ifdef ALLOW_TR10_CONTROL & , xx_tr1 # endif # ifdef ALLOW_HFLUXM_CONTROL & , xx_hfluxm # endif # endif /* ECCO_CTRL_DEPRECATED */ # ifdef ALLOW_GENARR2D_CONTROL & , xx_genarr2d # endif # ifdef ALLOW_GENARR3D_CONTROL & , xx_genarr3d # endif C # ifdef ECCO_CTRL_DEPRECATED _RL xx_theta(1-olx:snx+olx,1-oly:sny+oly,nr,nsx,nsy) _RL xx_salt(1-olx:snx+olx,1-oly:sny+oly,nr,nsx,nsy) _RL xx_uvel(1-olx:snx+olx,1-oly:sny+oly,nr,nsx,nsy) _RL xx_vvel(1-olx:snx+olx,1-oly:sny+oly,nr,nsx,nsy) _RL xx_etan(1-olx:snx+olx,1-oly:sny+oly,nsx,nsy) # ifdef ALLOW_DIFFKR_CONTROL _RL xx_diffkr(1-olx:snx+olx,1-oly:sny+oly,nr,nsx,nsy) # endif # ifdef ALLOW_KAPGM_CONTROL _RL xx_kapgm(1-olx:snx+olx,1-oly:sny+oly,nr,nsx,nsy) # endif # ifdef ALLOW_TR10_CONTROL _RL xx_tr1(1-olx:snx+olx,1-oly:sny+oly,nr,nsx,nsy) # endif # ifdef ALLOW_HFLUXM_CONTROL _RL xx_hfluxm(1-olx:snx+olx,1-oly:sny+oly,nsx,nsy) # endif # endif /* ECCO_CTRL_DEPRECATED */ _RL xx_place_holder # ifdef ALLOW_GENARR2D_CONTROL _RL xx_genarr2d(1-olx:snx+olx,1-oly:sny+oly,nsx,nsy, & maxCtrlArr2D) # endif # ifdef ALLOW_GENARR3D_CONTROL _RL xx_genarr3d(1-olx:snx+olx,1-oly:sny+oly,nr,nsx,nsy, & maxCtrlArr3D) # endif #endif c Auxiliary storage arrays for the control variables: c =================================================== c c xx_hflux0 - heat flux record before current date. c xx_hflux1 - heat flux record after current date c xx_sflux0 - salt flux record before current date. c xx_sflux1 - salt flux record after current date. c xx_tauu0 - zonal wind stress record before current date. c xx_tauu1 - zonal wind stress record after current date. c xx_tauv0 - meridional wind stress record before current date. c xx_tauv1 - meridional wind stress record after current date. #ifdef ECCO_CTRL_DEPRECATED # if (defined (ALLOW_HFLUX_CONTROL) || (defined (ALLOW_OPENAD) && defined (ALLOW_HFLUX0_CONTROL))) common /controlaux_hflux_r/ & xx_hflux0, & xx_hflux1 # elif (defined (ALLOW_ATEMP_CONTROL)) common /controlaux_atemp_r/ & xx_atemp0, & xx_atemp1 # endif # if (defined (ALLOW_SFLUX_CONTROL) || (defined (ALLOW_OPENAD) && defined (ALLOW_SFLUX0_CONTROL))) common /controlaux_swflux_r/ & xx_sflux0, & xx_sflux1 # elif (defined (ALLOW_AQH_CONTROL)) common /controlaux_aqh_r/ & xx_aqh0, & xx_aqh1 # endif # if (defined (ALLOW_ATM_MEAN_CONTROL)) common /controlaux_atm_mean_r/ & xx_atemp_mean, & xx_aqh_mean, & xx_uwind_mean, & xx_vwind_mean, & xx_precip_mean, & xx_swdown_mean # endif # if (defined (ALLOW_USTRESS_CONTROL) || (defined (ALLOW_OPENAD) && defined (ALLOW_TAUU0_CONTROL))) common /controlaux_ustress_r/ & xx_tauu0, & xx_tauu1 # endif # if (defined (ALLOW_UWIND_CONTROL)) common /controlaux_uwind_r/ & xx_uwind0, & xx_uwind1 # endif # if (defined (ALLOW_VSTRESS_CONTROL) || (defined (ALLOW_OPENAD) && defined (ALLOW_TAUV0_CONTROL))) common /controlaux_vstress_r/ & xx_tauv0, & xx_tauv1 # endif # if (defined (ALLOW_VWIND_CONTROL)) common /controlaux_vwind_r/ & xx_vwind0, & xx_vwind1 # endif # if (defined (ALLOW_PRECIP_CONTROL)) common /controlaux_precip_r/ & xx_precip0, & xx_precip1 # endif # if (defined (ALLOW_SWFLUX_CONTROL)) common /controlaux_swflux_r/ & xx_swflux0, & xx_swflux1 # endif # if (defined (ALLOW_SWDOWN_CONTROL)) common /controlaux_swdown_r/ & xx_swdown0, & xx_swdown1 # endif # if (defined (ALLOW_LWFLUX_CONTROL)) common /controlaux_lwflux_r/ & xx_lwflux0, & xx_lwflux1 # endif # if (defined (ALLOW_LWDOWN_CONTROL)) common /controlaux_lwdown_r/ & xx_lwdown0, & xx_lwdown1 # endif # if (defined (ALLOW_EVAP_CONTROL)) common /controlaux_evap_r/ & xx_evap0, & xx_evap1 # endif # if (defined (ALLOW_SNOWPRECIP_CONTROL)) common /controlaux_snowprecip_r/ & xx_snowprecip0, & xx_snowprecip1 # endif # if (defined (ALLOW_APRESSURE_CONTROL)) common /controlaux_apressure_r/ & xx_apressure0, & xx_apressure1 # endif # if (defined (ALLOW_RUNOFF_CONTROL)) common /controlaux_runoff_r/ & xx_runoff0, & xx_runoff1 # endif # if (defined (ALLOW_SST_CONTROL)) common /controlaux_sst_r/ & xx_sst0, & xx_sst1 # endif # if (defined (ALLOW_SSS_CONTROL)) common /controlaux_sss_r/ & xx_sss0, & xx_sss1 # endif # ifdef ALLOW_SHIFWFLX_CONTROL common /controlaux_shifwflx_r/ & xx_shifwflx0, & xx_shifwflx1 _RL xx_shifwflx0(1-olx:snx+olx,1-oly:sny+oly,nsx,nsy) _RL xx_shifwflx1(1-olx:snx+olx,1-oly:sny+oly,nsx,nsy) # endif /* ALLOW_SHIFWFLX_CONTROL */ # if (defined (ALLOW_HFLUX_CONTROL) || (defined (ALLOW_OPENAD) && defined (ALLOW_HFLUX0_CONTROL))) _RL xx_hflux0 (1-olx:snx+olx,1-oly:sny+oly,nsx,nsy) _RL xx_hflux1 (1-olx:snx+olx,1-oly:sny+oly,nsx,nsy) # elif (defined (ALLOW_ATEMP_CONTROL)) _RL xx_atemp0 (1-olx:snx+olx,1-oly:sny+oly,nsx,nsy) _RL xx_atemp1 (1-olx:snx+olx,1-oly:sny+oly,nsx,nsy) # endif # if (defined (ALLOW_SFLUX_CONTROL) || (defined (ALLOW_OPENAD) && defined (ALLOW_SFLUX0_CONTROL))) _RL xx_sflux0 (1-olx:snx+olx,1-oly:sny+oly,nsx,nsy) _RL xx_sflux1 (1-olx:snx+olx,1-oly:sny+oly,nsx,nsy) # elif (defined (ALLOW_AQH_CONTROL)) _RL xx_aqh0 (1-olx:snx+olx,1-oly:sny+oly,nsx,nsy) _RL xx_aqh1 (1-olx:snx+olx,1-oly:sny+oly,nsx,nsy) # endif # if (defined (ALLOW_USTRESS_CONTROL) || (defined (ALLOW_OPENAD) && defined (ALLOW_TAUU0_CONTROL))) _RL xx_tauu0(1-olx:snx+olx,1-oly:sny+oly,nsx,nsy) _RL xx_tauu1(1-olx:snx+olx,1-oly:sny+oly,nsx,nsy) # endif # if (defined (ALLOW_UWIND_CONTROL)) _RL xx_uwind0 (1-olx:snx+olx,1-oly:sny+oly,nsx,nsy) _RL xx_uwind1 (1-olx:snx+olx,1-oly:sny+oly,nsx,nsy) # endif # if (defined (ALLOW_VSTRESS_CONTROL) || (defined (ALLOW_OPENAD) && defined (ALLOW_TAUV0_CONTROL))) _RL xx_tauv0(1-olx:snx+olx,1-oly:sny+oly,nsx,nsy) _RL xx_tauv1(1-olx:snx+olx,1-oly:sny+oly,nsx,nsy) # endif # if (defined (ALLOW_VWIND_CONTROL)) _RL xx_vwind0 (1-olx:snx+olx,1-oly:sny+oly,nsx,nsy) _RL xx_vwind1 (1-olx:snx+olx,1-oly:sny+oly,nsx,nsy) # endif #if (defined (ALLOW_PRECIP_CONTROL)) _RL xx_precip0 (1-olx:snx+olx,1-oly:sny+oly,nsx,nsy) _RL xx_precip1 (1-olx:snx+olx,1-oly:sny+oly,nsx,nsy) # endif #if (defined (ALLOW_SWFLUX_CONTROL)) _RL xx_swflux0 (1-olx:snx+olx,1-oly:sny+oly,nsx,nsy) _RL xx_swflux1 (1-olx:snx+olx,1-oly:sny+oly,nsx,nsy) #endif # if (defined (ALLOW_SWDOWN_CONTROL)) _RL xx_swdown0 (1-olx:snx+olx,1-oly:sny+oly,nsx,nsy) _RL xx_swdown1 (1-olx:snx+olx,1-oly:sny+oly,nsx,nsy) # endif # if (defined (ALLOW_LWFLUX_CONTROL)) _RL xx_lwflux0 (1-olx:snx+olx,1-oly:sny+oly,nsx,nsy) _RL xx_lwflux1 (1-olx:snx+olx,1-oly:sny+oly,nsx,nsy) # endif # if (defined (ALLOW_LWDOWN_CONTROL)) _RL xx_lwdown0 (1-olx:snx+olx,1-oly:sny+oly,nsx,nsy) _RL xx_lwdown1 (1-olx:snx+olx,1-oly:sny+oly,nsx,nsy) # endif # if (defined (ALLOW_EVAP_CONTROL)) _RL xx_evap0 (1-olx:snx+olx,1-oly:sny+oly,nsx,nsy) _RL xx_evap1 (1-olx:snx+olx,1-oly:sny+oly,nsx,nsy) # endif # if (defined (ALLOW_SNOWPRECIP_CONTROL)) _RL xx_snowprecip0 & (1-olx:snx+olx,1-oly:sny+oly,nsx,nsy) _RL xx_snowprecip1 & (1-olx:snx+olx,1-oly:sny+oly,nsx,nsy) # endif # if (defined (ALLOW_APRESSURE_CONTROL)) _RL xx_apressure0 & (1-olx:snx+olx,1-oly:sny+oly,nsx,nsy) _RL xx_apressure1 & (1-olx:snx+olx,1-oly:sny+oly,nsx,nsy) # endif # if (defined (ALLOW_RUNOFF_CONTROL)) _RL xx_runoff0 (1-olx:snx+olx,1-oly:sny+oly,nsx,nsy) _RL xx_runoff1 (1-olx:snx+olx,1-oly:sny+oly,nsx,nsy) # endif # if (defined (ALLOW_SST_CONTROL)) _RL xx_sst0 (1-olx:snx+olx,1-oly:sny+oly,nsx,nsy) _RL xx_sst1 (1-olx:snx+olx,1-oly:sny+oly,nsx,nsy) # endif # if (defined (ALLOW_SSS_CONTROL)) _RL xx_sss0 (1-olx:snx+olx,1-oly:sny+oly,nsx,nsy) _RL xx_sss1 (1-olx:snx+olx,1-oly:sny+oly,nsx,nsy) # endif # if (defined (ALLOW_ATM_MEAN_CONTROL)) _RL xx_atemp_mean (1-olx:snx+olx,1-oly:sny+oly,nsx,nsy) _RL xx_aqh_mean (1-olx:snx+olx,1-oly:sny+oly,nsx,nsy) _RL xx_uwind_mean (1-olx:snx+olx,1-oly:sny+oly,nsx,nsy) _RL xx_vwind_mean (1-olx:snx+olx,1-oly:sny+oly,nsx,nsy) _RL xx_precip_mean(1-olx:snx+olx,1-oly:sny+oly,nsx,nsy) _RL xx_swdown_mean(1-olx:snx+olx,1-oly:sny+oly,nsx,nsy) # endif #endif /* ECCO_CTRL_DEPRECATED */ #ifdef ECCO_CTRL_DEPRECATED c Files where the control variables are stored: c ============================================= c c xx_theta_file - control vector temperature part. c xx_salt_file - control vector salinity part. c xx_hflux_file - control vector surface heat flux file. c xx_sflux_file - control vector surface salt flux file. c xx_tauu_file - control vector zonal wind stress file. c xx_tauv_file - control vector meridional wind stress file. common /controlfiles_c/ & xx_theta_file & , xx_salt_file & , xx_hflux_file & , xx_sflux_file & , xx_tauu_file & , xx_tauv_file & , xx_atemp_file & , xx_aqh_file & , xx_precip_file & , xx_swflux_file & , xx_swdown_file & , xx_lwflux_file & , xx_lwdown_file & , xx_evap_file & , xx_snowprecip_file & , xx_apressure_file & , xx_runoff_file & , xx_uwind_file & , xx_vwind_file & , xx_atemp_mean_file & , xx_aqh_mean_file & , xx_precip_mean_file & , xx_swdown_mean_file & , xx_uwind_mean_file & , xx_vwind_mean_file & , xx_diffkr_file & , xx_kapgm_file & , xx_kapredi_file & , xx_tr1_file & , xx_sst_file & , xx_sss_file & , xx_depth_file & , xx_efluxy_file & , xx_efluxp_file & , xx_bottomdrag_file & , xx_edtaux_file & , xx_edtauy_file & , xx_uvel_file & , xx_vvel_file & , xx_etan_file & , xx_relaxsst_file & , xx_relaxsss_file & , xx_theta_ini_fin_file & , xx_salt_ini_fin_file & , xx_siarea_file & , xx_siheff_file & , xx_sihsnow_file & , xx_gen2d_file & , xx_gen3d_file cHFLUXM_CONTROL & , xx_hfluxm_file cHFLUXM_CONTROL & , xx_shifwflx_file character*(MAX_LEN_FNAM) xx_theta_file character*(MAX_LEN_FNAM) xx_salt_file character*(MAX_LEN_FNAM) xx_hflux_file character*(MAX_LEN_FNAM) xx_sflux_file character*(MAX_LEN_FNAM) xx_tauu_file character*(MAX_LEN_FNAM) xx_tauv_file character*(MAX_LEN_FNAM) xx_atemp_file character*(MAX_LEN_FNAM) xx_aqh_file character*(MAX_LEN_FNAM) xx_precip_file character*(MAX_LEN_FNAM) xx_swflux_file character*(MAX_LEN_FNAM) xx_swdown_file character*(MAX_LEN_FNAM) xx_lwflux_file character*(MAX_LEN_FNAM) xx_lwdown_file character*(MAX_LEN_FNAM) xx_evap_file character*(MAX_LEN_FNAM) xx_snowprecip_file character*(MAX_LEN_FNAM) xx_apressure_file character*(MAX_LEN_FNAM) xx_runoff_file character*(MAX_LEN_FNAM) xx_uwind_file character*(MAX_LEN_FNAM) xx_vwind_file character*(MAX_LEN_FNAM) xx_atemp_mean_file character*(MAX_LEN_FNAM) xx_aqh_mean_file character*(MAX_LEN_FNAM) xx_precip_mean_file character*(MAX_LEN_FNAM) xx_swdown_mean_file character*(MAX_LEN_FNAM) xx_uwind_mean_file character*(MAX_LEN_FNAM) xx_vwind_mean_file character*(MAX_LEN_FNAM) xx_diffkr_file character*(MAX_LEN_FNAM) xx_kapgm_file character*(MAX_LEN_FNAM) xx_kapredi_file character*(MAX_LEN_FNAM) xx_tr1_file character*(MAX_LEN_FNAM) xx_sst_file character*(MAX_LEN_FNAM) xx_sss_file character*(MAX_LEN_FNAM) xx_depth_file character*(MAX_LEN_FNAM) xx_efluxy_file character*(MAX_LEN_FNAM) xx_efluxp_file character*(MAX_LEN_FNAM) xx_bottomdrag_file character*(MAX_LEN_FNAM) xx_edtaux_file character*(MAX_LEN_FNAM) xx_edtauy_file character*(MAX_LEN_FNAM) xx_uvel_file character*(MAX_LEN_FNAM) xx_vvel_file character*(MAX_LEN_FNAM) xx_etan_file character*(MAX_LEN_FNAM) xx_relaxsst_file character*(MAX_LEN_FNAM) xx_relaxsss_file character*(MAX_LEN_FNAM) xx_theta_ini_fin_file character*(MAX_LEN_FNAM) xx_salt_ini_fin_file character*(MAX_LEN_FNAM) xx_siarea_file character*(MAX_LEN_FNAM) xx_siheff_file character*(MAX_LEN_FNAM) xx_sihsnow_file character*(MAX_LEN_FNAM) xx_gen2d_file character*(MAX_LEN_FNAM) xx_gen3d_file cHFLUXM_CONTROL character*(MAX_LEN_FNAM) xx_hfluxm_file cHFLUXM_CONTROL character*(MAX_LEN_FNAM) xx_shifwflx_file c Calendar information for the control variables: c =============================================== c c xx_${varname}period - sampling interval for the ${varname} control c part in seconds c special cases for ifdef ALLOW_CAL (in anology to pkg/exf): c xx_${varname}period = -12. : control parameter is the seasonal cycle c xx_${varname}period = 0. : control parameter is constant in time c c The naming convention follows mostly that of the exf-pkg. A few c examples follow: c xx_atempperiod - sampling interval for the atmospheric surface c temperature control part. c ... c xx_hfluxperiod - sampling interval for the heat flux control part. c xx_sfluxperiod - sampling interval for the salt flux control part. c xx_tauuperiod - sampling interval for the zonal wind c stress control part. c xx_tauvperiod - sampling interval for the meridional wind c stress control part. c ... common /controltimes_r/ & xx_hfluxperiod & , xx_sfluxperiod & , xx_tauuperiod & , xx_tauvperiod & , xx_atempperiod & , xx_aqhperiod & , xx_precipperiod & , xx_swfluxperiod & , xx_swdownperiod & , xx_lwfluxperiod & , xx_lwdownperiod & , xx_evapperiod & , xx_snowprecipperiod & , xx_apressureperiod & , xx_runoffperiod & , xx_uwindperiod & , xx_vwindperiod & , xx_sstperiod & , xx_sssperiod & , xx_shifwflxperiod _RL xx_hfluxperiod _RL xx_sfluxperiod _RL xx_tauuperiod _RL xx_tauvperiod _RL xx_atempperiod _RL xx_aqhperiod _RL xx_precipperiod _RL xx_swfluxperiod _RL xx_swdownperiod _RL xx_lwfluxperiod _RL xx_lwdownperiod _RL xx_evapperiod _RL xx_snowprecipperiod _RL xx_apressureperiod _RL xx_runoffperiod _RL xx_uwindperiod _RL xx_vwindperiod _RL xx_sstperiod _RL xx_sssperiod _RL xx_shifwflxperiod common /ctrl_param_trend_removal/ & xx_hflux_remo_intercept, xx_hflux_remo_slope, & xx_sflux_remo_intercept, xx_sflux_remo_slope, & xx_tauu_remo_intercept, xx_tauu_remo_slope, & xx_tauv_remo_intercept, xx_tauv_remo_slope, & xx_atemp_remo_intercept, xx_atemp_remo_slope, & xx_aqh_remo_intercept, xx_aqh_remo_slope, & xx_precip_remo_intercept, xx_precip_remo_slope, & xx_swflux_remo_intercept, xx_swflux_remo_slope, & xx_swdown_remo_intercept, xx_swdown_remo_slope, & xx_lwflux_remo_intercept, xx_lwflux_remo_slope, & xx_lwdown_remo_intercept, xx_lwdown_remo_slope, & xx_evap_remo_intercept, xx_evap_remo_slope, & xx_snowprecip_remo_intercept, & xx_snowprecip_remo_slope, & xx_apressure_remo_intercept, & xx_apressure_remo_slope, & xx_sst_remo_intercept, xx_sst_remo_slope, & xx_sss_remo_intercept, xx_sss_remo_slope, & xx_runoff_remo_intercept, xx_runoff_remo_slope, & xx_uwind_remo_intercept, xx_uwind_remo_slope, & xx_vwind_remo_intercept, xx_vwind_remo_slope, & xx_shifwflx_remo_intercept, xx_shifwflx_remo_slope _RL xx_hflux_remo_intercept, xx_hflux_remo_slope _RL xx_sflux_remo_intercept, xx_sflux_remo_slope _RL xx_tauu_remo_intercept, xx_tauu_remo_slope _RL xx_tauv_remo_intercept, xx_tauv_remo_slope _RL xx_atemp_remo_intercept, xx_atemp_remo_slope _RL xx_aqh_remo_intercept, xx_aqh_remo_slope _RL xx_precip_remo_intercept, xx_precip_remo_slope _RL xx_swflux_remo_intercept, xx_swflux_remo_slope _RL xx_swdown_remo_intercept, xx_swdown_remo_slope _RL xx_lwflux_remo_intercept, xx_lwflux_remo_slope _RL xx_lwdown_remo_intercept, xx_lwdown_remo_slope _RL xx_evap_remo_intercept, xx_evap_remo_slope _RL xx_snowprecip_remo_intercept _RL xx_snowprecip_remo_slope _RL xx_apressure_remo_intercept _RL xx_apressure_remo_slope _RL xx_sst_remo_intercept, xx_sst_remo_slope _RL xx_sss_remo_intercept, xx_sss_remo_slope _RL xx_runoff_remo_intercept, xx_runoff_remo_slope _RL xx_uwind_remo_intercept, xx_uwind_remo_slope _RL xx_vwind_remo_intercept, xx_vwind_remo_slope _RL xx_shifwflx_remo_intercept,xx_shifwflx_remo_slope c xx_hfluxstartdate - start date for the heat flux control part. c xx_sfluxstartdate - start date for the salt flux control part. c xx_tauustartdate - start date for the zonal wind stress c control part. c xx_tauvstartdate - start date for the meridional wind stress c control part. common /controltimes_i/ & xx_hfluxstartdate1 & , xx_hfluxstartdate2 & , xx_sfluxstartdate1 & , xx_sfluxstartdate2 & , xx_tauustartdate1 & , xx_tauustartdate2 & , xx_tauvstartdate1 & , xx_tauvstartdate2 & , xx_atempstartdate1 & , xx_atempstartdate2 & , xx_aqhstartdate1 & , xx_aqhstartdate2 & , xx_precipstartdate1 & , xx_precipstartdate2 & , xx_swfluxstartdate1 & , xx_swfluxstartdate2 & , xx_swdownstartdate1 & , xx_swdownstartdate2 & , xx_snowprecipstartdate1 & , xx_snowprecipstartdate2 & , xx_lwfluxstartdate1 & , xx_lwfluxstartdate2 & , xx_lwdownstartdate1 & , xx_lwdownstartdate2 & , xx_evapstartdate1 & , xx_evapstartdate2 & , xx_apressurestartdate1 & , xx_apressurestartdate2 & , xx_runoffstartdate1 & , xx_runoffstartdate2 & , xx_uwindstartdate1 & , xx_uwindstartdate2 & , xx_vwindstartdate1 & , xx_vwindstartdate2 & , xx_sststartdate1 & , xx_sststartdate2 & , xx_sssstartdate1 & , xx_sssstartdate2 & , xx_hfluxstartdate & , xx_sfluxstartdate & , xx_tauustartdate & , xx_tauvstartdate & , xx_atempstartdate & , xx_aqhstartdate & , xx_precipstartdate & , xx_swfluxstartdate & , xx_swdownstartdate & , xx_uwindstartdate & , xx_snowprecipstartdate & , xx_lwfluxstartdate & , xx_lwdownstartdate & , xx_evapstartdate & , xx_apressurestartdate & , xx_runoffstartdate & , xx_vwindstartdate & , xx_sststartdate & , xx_sssstartdate & , xx_shifwflxstartdate1 & , xx_shifwflxstartdate2 & , xx_shifwflxstartdate integer xx_hfluxstartdate1 integer xx_hfluxstartdate2 integer xx_sfluxstartdate1 integer xx_sfluxstartdate2 integer xx_tauustartdate1 integer xx_tauustartdate2 integer xx_tauvstartdate1 integer xx_tauvstartdate2 integer xx_atempstartdate1 integer xx_atempstartdate2 integer xx_aqhstartdate1 integer xx_aqhstartdate2 integer xx_precipstartdate1 integer xx_precipstartdate2 integer xx_swfluxstartdate1 integer xx_swfluxstartdate2 integer xx_swdownstartdate1 integer xx_swdownstartdate2 integer xx_snowprecipstartdate1 integer xx_snowprecipstartdate2 integer xx_lwfluxstartdate1 integer xx_lwfluxstartdate2 integer xx_lwdownstartdate1 integer xx_lwdownstartdate2 integer xx_evapstartdate1 integer xx_evapstartdate2 integer xx_apressurestartdate1 integer xx_apressurestartdate2 integer xx_runoffstartdate1 integer xx_runoffstartdate2 integer xx_uwindstartdate1 integer xx_uwindstartdate2 integer xx_vwindstartdate1 integer xx_vwindstartdate2 integer xx_sststartdate1 integer xx_sststartdate2 integer xx_sssstartdate1 integer xx_sssstartdate2 integer xx_shifwflxstartdate1 integer xx_shifwflxstartdate2 integer xx_hfluxstartdate(4) integer xx_sfluxstartdate(4) integer xx_tauustartdate(4) integer xx_tauvstartdate(4) integer xx_atempstartdate(4) integer xx_aqhstartdate(4) integer xx_precipstartdate(4) integer xx_swfluxstartdate(4) integer xx_swdownstartdate(4) integer xx_snowprecipstartdate(4) integer xx_lwfluxstartdate(4) integer xx_lwdownstartdate(4) integer xx_evapstartdate(4) integer xx_apressurestartdate(4) integer xx_runoffstartdate(4) integer xx_uwindstartdate(4) integer xx_vwindstartdate(4) integer xx_sststartdate(4) integer xx_sssstartdate(4) integer xx_shifwflxstartdate(4) character*( 80) fname_theta(3) character*( 80) fname_salt(3) character*( 80) fname_hflux(3) character*( 80) fname_sflux(3) character*( 80) fname_tauu(3) character*( 80) fname_tauv(3) character*( 80) fname_atemp(3) character*( 80) fname_aqh(3) character*( 80) fname_precip(3) character*( 80) fname_swflux(3) character*( 80) fname_swdown(3) character*( 80) fname_snowprecip(3) character*( 80) fname_lwflux(3) character*( 80) fname_lwdown(3) character*( 80) fname_evap(3) character*( 80) fname_apressure(3) character*( 80) fname_runoff(3) character*( 80) fname_uwind(3) character*( 80) fname_vwind(3) character*( 80) fname_atemp_mean(3) character*( 80) fname_aqh_mean(3) character*( 80) fname_precip_mean(3) character*( 80) fname_swdown_mean(3) character*( 80) fname_uwind_mean(3) character*( 80) fname_vwind_mean(3) character*( 80) fname_diffkr(3) character*( 80) fname_kapgm(3) character*( 80) fname_kapredi(3) character*( 80) fname_tr1(3) character*( 80) fname_sst(3) character*( 80) fname_sss(3) character*( 80) fname_depth(3) character*( 80) fname_hfacc(3) character*( 80) fname_efluxy(3) character*( 80) fname_efluxp(3) character*( 80) fname_bottomdrag(3) character*( 80) fname_edtaux(3) character*( 80) fname_edtauy(3) character*( 80) fname_uvel(3) character*( 80) fname_vvel(3) character*( 80) fname_etan(3) character*( 80) fname_relaxsst(3) character*( 80) fname_relaxsss(3) character*( 80) fname_siarea(3) character*( 80) fname_siheff(3) character*( 80) fname_sihsnow(3) character*( 80) fname_gen2d(3) character*( 80) fname_gen3d(3) cHFLUXM_CONTROL character*( 80) fname_hfluxm(3) cHFLUXM_CONTROL character*( 80) fname_shifwflx(3) #endif /* ECCO_CTRL_DEPRECATED */ c ================================================================== c END OF HEADER CONTROLVARS ctrl.h c ==================================================================