C $Header: /u/gcmpack/MITgcm/pkg/diagnostics/diagnostics_switch_onoff.F,v 1.20 2015/06/02 20:58:22 jmc Exp $ C $Name: $ #include "DIAG_OPTIONS.h" C---+----1----+----2----+----3----+----4----+----5----+----6----+----7-|--+----| CBOP 0 C !ROUTINE: DIAGNOSTICS_SWITCH_ONOFF C !INTERFACE: SUBROUTINE DIAGNOSTICS_SWITCH_ONOFF( myTime, myIter, myThid ) C !DESCRIPTION: C----- C Called at the beginning of the time-step, C to switch on/off diagnostics for snap-shot output C----- C during iterations that are multiple of |freq|, C switch ON diagnostics (ndiag>=0) that will become active C and then can be written at the end of the time-step ; C otherwise, put diagnostics in non-active mode (ndiag=-1) C----- C !USES: IMPLICIT NONE #include "SIZE.h" #include "EEPARAMS.h" #include "PARAMS.h" #include "DIAGNOSTICS_SIZE.h" #include "DIAGNOSTICS.h" C !INPUT PARAMETERS: C myTime :: current Time of simulation ( s ) C myIter :: current Iteration number C myThid :: my Thread Id number _RL myTime INTEGER myIter INTEGER myThid CEOP C !LOCAL VARIABLES: C newIter :: future iteration number C j,m,n :: loop index CHARACTER*(MAX_LEN_MBUF) msgBuf c INTEGER newIter INTEGER m, n, nd INTEGER bi, bj, ip, iSp LOGICAL time4SnapShot _RL phiSec, freqSec INTEGER nInterval _RL xInterval LOGICAL dBugFlag INTEGER dBugUnit #ifdef ALLOW_FIZHI LOGICAL ALARM2NEXT EXTERNAL ALARM2NEXT CHARACTER *9 tagname #endif LOGICAL DIFF_PHASE_MULTIPLE EXTERNAL DIFF_PHASE_MULTIPLE C---+----1----+----2----+----3----+----4----+----5----+----6----+----7-|--+----| dBugFlag = debugLevel.GE.debLevE .AND. myThid.EQ.1 dBugUnit = errorMessageUnit C-- Track diagnostics pkg activation status: IF ( myIter.EQ.nIter0 ) THEN c IF ( diag_pkgStatus.NE.10 ) STOP _BARRIER _BEGIN_MASTER(myThid) diag_pkgStatus = ready2fillDiags _END_MASTER(myThid) _BARRIER c ELSEIF c IF ( diag_pkgStatus.NE.ready2fillDiags ) STOP ENDIF c newIter = 1 + myIter DO n = 1,nlists IF ( freq(n).LT.0. ) THEN C-- Select diagnostics list that uses instantaneous output freqSec = freq(n) phiSec = phase(n) time4SnapShot = DIFF_PHASE_MULTIPLE( phiSec, freqSec, & myTime, deltaTClock ) #ifdef ALLOW_FIZHI IF ( useFIZHI ) THEN WRITE(tagname,'(A,I2.2)')'diagtag',n time4SnapShot = ALARM2NEXT(tagname,deltaT) ENDIF #endif #ifdef ALLOW_CAL IF ( useCAL ) THEN CALL CAL_TIME2DUMP( phiSec, freqSec, deltaTClock, U time4SnapShot, I myTime, myIter, myThid ) ENDIF #endif /* ALLOW_CAL */ DO bj=myByLo(myThid), myByHi(myThid) DO bi=myBxLo(myThid), myBxHi(myThid) IF ( time4SnapShot ) THEN C-- switch ON diagnostics of output-stream # n DO m=1,nActive(n) c nd = jdiag(m,n) c IF (ndiag(nd).NE.0) WRITE(0,*) myIter,nd,ndiag(nd),' ->',0 ip = idiag(m,n) IF (ip.GT.0) ndiag(ip,bi,bj) = 0 ENDDO ELSE C-- switch OFF diagnostics of output-stream # n DO m=1,nActive(n) c nd = jdiag(m,n) c IF (ndiag(nd).NE.-1) WRITE(0,*) myIter,nd,ndiag(nd),' ->',-1 ip = idiag(m,n) IF (ip.GT.0) ndiag(ip,bi,bj) = -1 ENDDO ENDIF ENDDO ENDDO C-- list with instantaneous output: end ENDIF IF ( averageCycle(n).GT.1 ) THEN C-- Select diagnostics list that uses periodic averaging xInterval = myTime + deltaTClock*0.5 _d 0 - averagePhase(n) xInterval = xInterval / averageFreq(n) IF ( xInterval.GE.0. ) THEN nInterval = INT(xInterval) ELSE nInterval = 1 + INT( -xInterval/FLOAT(averageCycle(n)) ) nInterval = nInterval*averageCycle(n) + INT(xInterval) - 1 ENDIF nInterval = MOD(nInterval,averageCycle(n)) C- check future value of pdiag: IF (dBugFlag.AND.pdiag(n,1,1).NE.nInterval) & WRITE(dBugUnit,'(A,I8,3(A,I4),F17.6)') & 'DIAG_SWITCH_ONOFF: at it=', myIter, ', list:', n, & ' switch', pdiag(n,1,1),' ->', nInterval, xInterval IF ( nInterval.LT.0 .OR. nInterval.GE.averageCycle(n) ) THEN WRITE(msgBuf,'(2A,I3,A,I4)') 'DIAGNOSTICS_SWITCH_ONOFF:', & ' error setting pdiag(n=',n,') to:', nInterval CALL PRINT_ERROR( msgBuf , myThid ) WRITE(msgBuf,'(2A,I4,A,F17.6)') 'DIAGNOSTICS_SWITCH_ONOFF:', & ' cycle=', averageCycle(n), ', xInt=', xInterval CALL PRINT_ERROR( msgBuf , myThid ) STOP 'ABNORMAL END: S/R DIAGNOSTICS_SWITCH_ONOFF' ENDIF DO bj=myByLo(myThid), myByHi(myThid) DO bi=myBxLo(myThid), myBxHi(myThid) pdiag(n,bi,bj) = nInterval ENDDO ENDDO C-- list with periodic averaging: end ENDIF ENDDO C---+----1----+----2----+----3----+----4----+----5----+----6----+----7-|--+----| DO n = 1,diagSt_nbLists IF ( diagSt_freq(n).LT.0. ) THEN C-- Select diagnostics list that uses instantaneous output dBugFlag = debugLevel.GE.debLevE freqSec = diagSt_freq(n) phiSec = diagSt_phase(n) time4SnapShot = DIFF_PHASE_MULTIPLE( phiSec, freqSec, & myTime, deltaTClock ) #ifdef ALLOW_FIZHI IF ( useFIZHI ) THEN WRITE(tagname,'(A,I2.2)')'diagStg',n time4SnapShot = ALARM2NEXT(tagname,deltaT) ENDIF #endif #ifdef ALLOW_CAL IF ( useCAL ) THEN CALL CAL_TIME2DUMP( phiSec, freqSec, deltaTClock, U time4SnapShot, I myTime, myIter, myThid ) ENDIF #endif /* ALLOW_CAL */ DO bj=myByLo(myThid), myByHi(myThid) DO bi=myBxLo(myThid), myBxHi(myThid) dBugFlag = dBugFlag.AND.(bi.EQ.1.AND.bj.EQ.1.AND.myThid.EQ.1) IF ( time4SnapShot ) THEN C-- switch ON diagnostics of output-stream # n DO m=1,diagSt_nbActv(n) iSp = iSdiag(m,n) IF (iSp.GT.0) THEN nd = jSdiag(m,n) IF (dBugFlag.AND.qSdiag(0,0,iSp,bi,bj).NE. 0.) & WRITE(dBugUnit,'(A,I8,A,I6,3A,1PE10.3,A,I3)') & 'DIAG_SWITCH_ONOFF: at it=', myIter, ' diag:', nd, & ' ',cdiag(nd),' :',qSdiag(0,0,iSp,bi,bj),' ->', 0 qSdiag(0,0,iSp,bi,bj) = 0. ENDIF ENDDO ELSE C-- switch OFF diagnostics of output-stream # n DO m=1,diagSt_nbActv(n) iSp = iSdiag(m,n) IF (iSp.GT.0) THEN nd = jSdiag(m,n) IF (dBugFlag.AND.qSdiag(0,0,iSp,bi,bj).NE.-1.) & WRITE(dBugUnit,'(A,I8,A,I6,3A,1PE10.3,A,I3)') & 'DIAG_SWITCH_ONOFF: at it=', myIter, ' diag:', nd, & ' ',cdiag(nd),' :',qSdiag(0,0,iSp,bi,bj),' ->', -1 qSdiag(0,0,iSp,bi,bj) = -1. ENDIF ENDDO ENDIF ENDDO ENDDO ENDIF ENDDO RETURN END